Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: ztasevski on May 05, 2004, 08:54:58 AM

Title: Tape Drives
Post by: ztasevski on May 05, 2004, 08:54:58 AM
Hi,

Does anyone know where I can get a complete list of compatible tape drives for SME 6.

Zoran
Title: Tape Drives
Post by: ztasevski on May 07, 2004, 06:03:51 AM
Can anyone recommend/tested any 35GB + IDE/SCSI tape drives for an SME6 server ?

I have been trying to source SDX-? series of Sony tape drives with no luck as they have been discountinued ?

Thanks in advance !
Title: Tape Drives
Post by: Boris on May 07, 2004, 08:36:13 AM
VXA-1 or VXA-2 work well.
Title: Tape Drives
Post by: Kelvin on May 08, 2004, 03:06:58 PM
I've been using Sony's AIT-1 (IDE and SCSI versions) drives without hassles.

And they still exist in Australia for sure.

Kelvin
Title: Tape Drives
Post by: ztasevski on May 11, 2004, 12:22:42 PM
thanks for your reply boris

Quote from: "Boris"
VXA-1 or VXA-2 work well.


i presume you are referring to the exabyte vxa drives ?

any particular models that you have installed ?
Title: Tape Drives
Post by: ztasevski on May 11, 2004, 12:52:11 PM
thanks for your reply kelvin

Quote from: "Kelvin"
I've been using Sony's AIT-1 (IDE and SCSI versions) drives without hassles.

And they still exist in Australia for sure.

Kelvin


which models of the sony ait-1 tape drives have you successfully installed ?

have you installed:

SDX-400b - http://www.sony.com.au/support/product/product.jsp?selectedProd=SDX400B&categoryId=21635

or

AITI90A - http://www.sony.com.au/support/product/product.jsp?selectedProd=AITI90A&categoryId=21635

i have been on redhat's HCL for redhat 7.3 and they only have the SDX-400c listed as compatible but after checking with my h/w vendor i found out that they got replaced by the
Title: Tape Drives
Post by: Boris on May 11, 2004, 09:23:07 PM
Quote from: "ztasevski"
thanks for your reply boris

i presume you are referring to the exabyte vxa drives ?

any particular models that you have installed ?

Now exabyte, originaly they were "ecrix". I have a dozen or so different models in use. SCSI VXA-1 and VXA-2 and IDE VXA-1.
Use dedicated SCSI adapter from well known and supported brands. (Think Adaptec :-))
Title: Tape Drives
Post by: ztasevski on May 12, 2004, 01:41:46 AM
hi boris !

any particular Adaptec models you can recommend ?
Title: Tape Drives
Post by: Boris on May 12, 2004, 03:54:50 AM
Any PCI controller for VXA-1 and LVD capable PCI controller for VXA-2. 160 or 320 Mbs models work great.
Title: Tape Drives
Post by: Anonymous on May 12, 2004, 04:08:43 AM
i'll give them a shot

thankx again  :-)
Title: Tape Drives
Post by: Anonymous on May 12, 2004, 10:43:53 AM
I'm using a SUN DLT4000 with Arkia and it works really well ... love it.
Title: Tape Drives
Post by: ztasevski on May 13, 2004, 01:59:41 AM
how about raid 1 & raid 5 controllers ?

Does adaptec slide into the "SME Friendly" vendor ?

Can anyone recommend some that work well ?
Title: Tape Drives
Post by: Boris on May 13, 2004, 04:37:46 AM
I have many DELL servers with PERC (3 and 4) SCSI RAID controllers. They work fine. IDE RAID subsystems accusys 7500 and 7630 work well too. For cheaper servers builtin software RAID1 (Mirror) fast and stable enough.