Koozali.org: home of the SME Server
Legacy Forums => General Discussion (Legacy) => Topic started by: aussie on June 28, 2004, 06:10:48 AM
-
I had a 5.5 working great.
I made a new install 6.01sme, restored the previously backdup of the configuration and ALL IS WELL!
However the pppoe link - through a DLink ADSL modem in bridge mode (which worked fine with 5.5) - seems to drop somestimes after a few minutes and rareley lasting more than 1/2 a day.
Ive no idea why as the link/modem worked perfect for months with 5.5.
Any ideas where to start looking would be appreciated.
Rob :pint:
-
Do you have any other equipment hanging off the adsl line?? I had an external modem hanging off my dsl line (with a filter of course) and the pppoe was dropping regularly, pulled the line from the modem and now it very rarely plays up. (stuffed up my hylafax but the dsl is working great :-((
-
Do you have any other equipment hanging off the adsl line?? I had an external modem hanging off my dsl line (with a filter of course) and the pppoe was dropping regularly, pulled the line from the modem and now it very rarely plays up. (stuffed up my hylafax but the dsl is working great :-((
NO! nothing past the LAN connection to the ADSL has changed: just the phone on the other side!
Browsing log files it seems (maybe)
a 'message' line says 'serial link appears
disconnected'
then adds 'script /etc/ppp/ip-down started'
last three connects are 5.6, 45.1, 6.1 minutes!
The config is 'dedicated server & gateway', PPPoE
and the settings must be right to get a connect at all!
It does occur to me that the 5.5 was a dialup modem before becoming ADSL - I did backup the 5.6 settings to desktop and restore onto 6.01: could it have thrown back somehow?
TIA Rob
-
Hi,
I dunno if it's possible for you, but I would try to do a fresh install (possibly on another disk), and look fi the connection is still good after (saying) 1 or 2 days.
If yes, it's definitively an upgrade trouble, then you should carefully inspect the two /home/e-smith/configuration' file.
Maybe would you find the differences here.
HTH,
-
Hi,
I dunno if it's possible for you, but I would try to do a fresh install (possibly on another disk), and look fi the connection is still good after (saying) 1 or 2 days.
If yes, it's definitively an upgrade trouble, then you should carefully inspect the two /home/e-smith/configuration' file.
Maybe would you find the differences here.
HTH,
Thank you for your help!
No I cannot fresh install, but I did look at the configuration: sadly there are no significant differences (just different IP, domain, admin etc.)
By the way, mt french is not as good as your english :-( what is HTH?
Robert
-
Aussie,
I'm fairly sure that your problem is not related to the server. I would disconnect ALL other devices from the dsl line so that the only device connected to the line is the dsl modem and see how that goes. As you increase the speed and distance from the exchange the service becomes more 'fickle' I'm guessing that you probably have a high speed service (1.5M or 512k) and that you are located close to the maximum allowed distance from the exchange. Can you post the relevant section from your log files? BTW HTH means "Hope That Helps" (and BTW means By The Way :-))
Regards Lloyd
-
Aussie,
I'm fairly sure that your problem is not related to the server. I would disconnect ALL other devices from the dsl line so that the only device connected to the line is the dsl modem and see how that goes. As you increase the speed and distance from the exchange the service becomes more 'fickle' I'm guessing that you probably have a high speed service (1.5M or 512k) and that you are located close to the maximum allowed distance from the exchange. Can you post the relevant section from your log files? BTW HTH means "Hope That Helps" (and BTW means By The Way :-))
Regards Lloyd
Ive been checking the ISP logs on log in time...
Sat & Sun was 1 or 2 connections per day: Mon was 40!
It seems something is interferring during office hours only (although that is also when it is busy).
(Im checking to see if anything has been put on the network I dont know about!)
The /var/log/pppoe/current file indicates
/etc/ppp/ip-up started
/etc/ppp/ip-up finished
no response to 2 echo-requests
Serial link appears to be disconnected
/etc/ppp/ip-down started
sent [LCP TermReq id=0x9 "Peer not responding"]
sent [LCP TermReq id=0xa "Peer not responding"]
/etc/ppp/ip-down finished
Connection Terminated
Connect time 92.2 minutes
Sent bytes Recd bytes
Waiting for 1 child processes...
script /usr/sbin/pppoe -I eth1 -T 120 -U -m 1412, pid 12398
pppoe: read (aynsReadFromPPP): Input/output error
Script /usr/sbin/pppoe -I eth1 -T 120 -U -m 1412 finished (pid 12398), status = 0x1
Connect time 92.2 minutes
Sent bytes Recd bytes
using channel 37
Using interface ppp0
Connect: ppp0 <--> /dev/pts/0
and onto
PAP Authentication succeeded
....
local IP
remote IP
/etc/ppp/ip-up started
/etc/ppp/ip-up finished, status = 0x0
-
Could be some kind of driver issue just for fun try another "different" brand network card.