Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: tauphi100 on June 30, 2004, 04:43:35 AM

Title: Virtual Domains on 6.0beta 3
Post by: tauphi100 on June 30, 2004, 04:43:35 AM: Greeings,

I am a newbie to SME server. I had a 5.6 running flawlessly for a year and decided to upgrade to 6.0beta 3. Post upgrade all domains ended up displaying the same home page. Thought it was an upgrade error so I wiped and rebuilt the server from scratch. Manually uploaded files and created the virtual domains and experienced the same problem. Can anyone shed some light on this wierdness? Perhaps I didn't do something in a specific order? Please advise. I have 3 domains down.

Regards,
Maximus
Title: Virtual Domains on 6.0beta 3
Post by: crazybob on June 30, 2004, 05:33:51 AM: Could use a few more details as to what you have done so far, But first thought is to make shure that the index.html file is not the one from the install.

Bob
Title: So Far
Post by: tauphi100 on June 30, 2004, 01:07:48 PM: What I have done so far:
After a full disk format and re-installation of SME, I created three ibays. I then uploaded each websites information in each ibay. I then created the virtual domain and pointed it to the new ibay.

I retested this process this AM and got the same result. I always see the primary domains information.

Regards,
Brian
Title: Virtual Domains on 6.0beta 3
Post by: crazybob on June 30, 2004, 01:56:36 PM: When you created the ibay, what kind of access did you allow? (it defaults to no access) I am assuming you are trying to access this from inside the network, not from the public internet. Is that correct?
Title: ibay setup
Post by: tauphi100 on June 30, 2004, 03:45:33 PM: Group: Admin
FileSharing: Write=Group; Read=Everyone
Public Acceess via Web:Entire Internet (no password required)
Execution of dynamic content:enabled

These are the same settings as previous build on 5.6.

Regards,
Maximus
Title: Virtual Domains on 6.0beta 3
Post by: Anonymous on June 30, 2004, 04:53:38 PM: I too am having this problem.

I also have a 5.6 SME server that works fine but the 6.0 does not.

I have looked at the new RPMS and installed them but this still has not fixed my problem.

Has this been overlooked in 6?

Thanks

Niyte
Title: Virtual Domains on 6.0beta 3
Post by: crazybob on June 30, 2004, 06:17:08 PM: Next thing to check is under hostnames and addresses. for cach www.domain click on modify then save it to publish it globaly

Bob
Title: Settings
Post by: tauphi100 on June 30, 2004, 07:09:00 PM: I have checked that the domains display the appropriate information as you have indicated and they are all set for globally. Any other suggestions?
Title: Virtual Domains on 6.0beta 3
Post by: crazybob on July 01, 2004, 06:50:54 AM: I guess that I am at a loss at this point without being able to poke around in the server. From what you have told me, it looks like you have done everything correctly. I am running 10 websites with out any trouble, and was running on version 6.0, and upgraded to 6.0.01 without a hitch.

You might try to do a little more searching because it seems like I saw something about this a couple of weeks ago.

Bob
Title: Virtual Domains on 6.0beta 3
Post by: cydonia on July 01, 2004, 07:23:12 AM: I am also running it successfully on 6.0.1.

One thing though, how do you allow email users with the same username, but on different domains?

At the moment, user1@maindomain.com gets all mail sent to user1@anyvirtualdomain.com.

is there a workaround?
Title: Virtual Domains on 6.0beta 3
Post by: guest22 on July 01, 2004, 08:52:25 AM: I recall a bug in that BETA version of 6, regarding virtual domain. I guess you better use 6.0.1.

BETA 6 = BETA, obsolete and not supported by anybody.

RequestedDeletion
Title: Virtual Domains on 6.0beta 3
Post by: whte_rbt on July 01, 2004, 11:39:33 AM: Hi,

I had the same problem on 6b3, already last year. After installing all the available updates, that issue was fixed.

Was a known bug in 6b3 as they told me in the old e-smith.org-Forum.

But why you're using 6b3 while 6.0.1 is released?

Best,

whte_rbt
Title: Rebuild
Post by: tauphi100 on July 01, 2004, 02:07:19 PM: Greetings again.

I guess it would help if I used the right version. I assumed that CURRENT had the latest release. My bad. I will download the 6.0.1 release, do the build, and report back. Give me a day or three. Thanks for all your input. This is by far the best support for an open distro that I have ever received.

Regards.. :hammer:
Title: Virtual Domains on 6.0beta 3
Post by: crazybob on July 01, 2004, 02:15:04 PM: Quote from: "cydonia"
I am also running it successfully on 6.0.1.

One thing though, how do you allow email users with the same username, but on different domains?

At the moment, user1@maindomain.com gets all mail sent to user1@anyvirtualdomain.com.

is there a workaround?

One way is to use the virtual domain email addon from dungog.net

Bob
Title: All Working as Intended
Post by: tauphi100 on July 02, 2004, 04:21:34 AM: :-D

After rebuilding with 6.01, everything works as intended.

Solution: Download the right version!!!

Mirrors don't have the latest version, just an FYI!

Thanks for all the help.

Maximus