Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: [-TS-]Master_X on September 01, 2001, 01:29:59 AM

Title: E-Smith with Gamevoice
Post by: [-TS-]Master_X on September 01, 2001, 01:29:59 AM

Hi

I have e-smith ans use it as a server to connect with the Inet. I have another PC with a Voice-Com. Program(www.gamevoice.com), but it doesn't work. How can i get it work ??

I need Help plaese.

Sorry for my bad english but im german, perhaps you can answer in german :P

Title: Re: E-Smith with Gamevoice
Post by: trevor on September 01, 2001, 10:31:45 AM

[-TS-]Master_X wrote:
>
> Hi
>
> I have e-smith ans use it as a server to connect with the
> Inet. I have another PC with a Voice-Com.
> Program(www.gamevoice.com), but it doesn't work. How can i
> get it work ??
>
> I need Help plaese.
>
> Sorry for my bad english but im german, perhaps you can
> answer in german :P

You need to open UDP port 9110 as per the FAQ on their site http://www.gamevoice.com/Support/support.asp?Page=39&Product=1#Configure1.5

To do this look at the Howto created by Darrell May http://netsourced.com/servers/docs/ipportfw-howto.html or search this forum.

Good Luck

Title: Re: E-Smith with Gamevoice
Post by: [-TS-]Master_X on September 01, 2001, 04:31:04 PM

Hi

Thx for this help but im a newbei in linux and so on. How must i install e-smith-ipportfw-0.1.1-1.noarch.rpm and perhaps you  can give me a point to point tutorial.

Title: Re: E-Smith with Gamevoice
Post by: trevor on September 03, 2001, 10:46:33 AM

[-TS-]Master_X wrote:
>
> Hi
>
> Thx for this help but im a newbei in linux and so on. How
> must i install e-smith-ipportfw-0.1.1-1.noarch.rpm and
> perhaps you  can give me a point to point tutorial.

Sorry for the late reply. I'm travelling with work at the moment and haven't bee checking the forums much.

I suggest that you check out the RPM Howto from redhat (e-smith 4.1.2 is based on RedHat 7.0) at http://rpm.redhat.com/RPM-HOWTO/

To install ipportfw just download the the rpm to a directory on the server, cd to that directory and type rpm -Uvh e-smith-ipportfw-0.1.1-1.noarch.rpm

rpm -ivh is for an install, but the -Uvh (for update) works fine for both install & update. read the HOWTO and the rpm documentation for other options.

Good Luck
Trevor B

Title: Re: E-Smith with Gamevoice
Post by: [-TS-]Master_X on September 10, 2001, 05:41:14 PM

Hi

I have installt e-smith-ipportfw-0.1.1-1.noarch.rpm. , but what must i do now ??


THX

Title: Re: E-Smith with Gamevoice
Post by: [-TS-]Master_X on September 19, 2001, 10:16:19 PM

Hi no one wants to answer me ?

OK then i have to take another Linux cya