Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: Neririn on July 13, 2004, 09:20:37 PM

Title: DNS via DHCP
Post by: Neririn on July 13, 2004, 09:20:37 PM

Does anyone know how to set the DNS servers to be given out by the DHCP server?

Thanks

Title: DNS via DHCP
Post by: dmac on July 15, 2004, 02:29:01 AM

Are you using the build in DHCP server that is part of SME?

IF so, when you installed the SME server and ran the Admin setup console, you would have the option at this point to set up your DHCP setting including the start /end of you DHCP scope and DNS Server.

If you have a keyboard and monitor connected, log in as ADMIN with your admin password (same as the root PW).  If you are connected via you network, use Putty or telnet if you have enabled this access.  This will launch the Server Console.  In the Server Console select the "2. Configure this server" option.  Just keep going next until you get to the screen that says "Select DHCP server configuration".  Here you want to select the "ON" option.  You will then be able to set your start IP address, End IP address and the IP Address of your current DNS Server.  Don't forget to restart your server.

HTH

Darin

Title: DNS via DHCP
Post by: dmac on July 15, 2004, 02:32:11 AM

Almost forgot,  There is a server-manager panel that will allow you to set the DHCP Configuration items form the Web interface, but I had some problems with it reseting the DNS Server IP address to the Local SME server IP.  It was in one of the Forums that the DHCP panel was released, and there are some Contribs that deal with DHCP as well.

Darin

Title: DNS via DHCP
Post by: dmac on July 15, 2004, 06:37:20 AM

Try this contib:

/contribs/gwukoutz/beta/SME6/dhcpconfig/