Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: pstrout on July 21, 2004, 09:50:53 PM

Title: raid 1 not loading
Post by: pstrout on July 21, 2004, 09:50:53 PM

Hello, I'm new to e-smith so you will have to bear with me.  I'm setting e-smith up on a adaptec raid1 card 2100s(drivers maybe??) the iso gets as far as" loading vmlilnuz" and  a blinking curser appears, I know the ISO works because I used it recently at a linux seminar in an old ide drive.

Thanks

Paul

Title: raid 1 not loading
Post by: Mumm-Ra on July 21, 2004, 10:49:07 PM

A very quick look at the RedHat Hardware Compatibility list
http://hardware.redhat.com/hcl/
doesn't shown any support for you raid card.
A quick look on Adaptec's website shown that the raid card is currently shipping so I'm asuming that the model is relatively new.  Therefore I doubt that RedHat 7.3 would have support for it.

Title: raid 1 not loading
Post by: pstrout on July 22, 2004, 02:50:06 PM

Hello, I figured it out!! it was a scsi jumper on channel a drive, the raid 1 card works,  Thanks for your reply


Cordially,



Paul Strout