Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: charlien on July 28, 2004, 06:22:13 PM

Title: Raidmonitor on SME 6.01
Post by: charlien on July 28, 2004, 06:22:13 PM

I discovered I have a broken mirror with my second hard drive as seen by the following:

[root@pluto root]# cat /proc/mdstat
Personalities : [raid1]
read_ahead 1024 sectors
md2 : active raid1 hda3[0]
      264960 blocks [2/1] [U_]

md1 : active raid1 hda2[0] hdb2[1]
      77778624 blocks [2/2] [UU]

md0 : active raid1 hda1[0] hdb1[1]
      104320 blocks [2/2] [UU]

unused devices: <none>

Has anyone used the howto by Darrell May on an SME 6.01? I used it on a 5.5 server and it worked well. Any advice is appreciated. I know, back up first.
Charlie

Title: Raidmonitor on SME 6.01
Post by: Henk on July 28, 2004, 10:37:05 PM

I did use it a couple of weeks ago. No problem at all. I only had to change the lilo config after reinstalling the new disk. (mu hda was broken and the server didn't start from hdc without a rescue diskette)

Title: Raidmonitor on SME 6.01
Post by: charlien on July 28, 2004, 11:54:59 PM

Quote from: "Henk"

I did use it a couple of weeks ago. No problem at all. I only had to change the lilo config after reinstalling the new disk. (mu hda was broken and the server didn't start from hdc without a rescue diskette)

Any suggestions where I can get more info on the lilo config issue?

Charlie

Title: Raidmonitor on SME 6.01
Post by: Henk on July 29, 2004, 09:45:59 PM

It's discussed here http://forums.contribs.org/index.php?topic=23092.0