Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: del on September 07, 2004, 01:23:38 AM

Title: Raid Problem
Post by: del on September 07, 2004, 01:23:38 AM

Hi All,
I got this email from root today, can someone help me decipher it! Thanks

ALARM! RAID configuration problem

Current configuration is:

Personalities : [raid1]
read_ahead 1024 sectors
md2 : active raid1 hda3[0] hdc3[1]
      264512 blocks [2/2] [UU]
     
md1 : active raid1 hda2[0] hdc2[1]
      59678528 blocks [2/2] [UU]
     
md0 : active raid1 hda1[0](F) hdc1[1]
      104320 blocks [2/1] [_U]
     
unused devices: <none>
Last known good configuration was:

Personalities : [raid1]
read_ahead 1024 sectors
md2 : active raid1 hda3[0] hdc3[1]
      264512 blocks [2/2] [UU]
     
md1 : active raid1 hda2[0] hdc2[1]
      59678528 blocks [2/2] [UU]
     
md0 : active raid1 hda1[0] hdc1[1]
      104320 blocks [2/2] [UU]
     
unused devices: <none>

Regards,
Del

Title: Raid Problem
Post by: raem on September 07, 2004, 09:57:34 AM

Read the HOWTOs at
http://mirror.contribs.org/smeserver/contribs/dmay/mitel/contrib/raidmonitor/

Title: Raid Problem
Post by: del on September 07, 2004, 03:29:46 PM

Hi Ray,
Thanks for the link, I had already looked at the howto, but what I can't work out is that in the example it shows a missing U on each line and mine only shows it on the last line:
md0 : active raid1 hda1[0](F) hdc1[1]
104320 blocks [2/1] [_U]
So I am not sure what to think. The machine is in my office and I live near Cocoa Beach, so I am unable to go there due to Hurricane Frances. I may be able to get there later today.
Regards,
Del

Title: Raid Problem
Post by: raem on September 07, 2004, 05:18:25 PM

It looks like just one of your partitions has failed.

Title: Raid Problem
Post by: BobWilliams on September 07, 2004, 10:43:39 PM

Did you find a solution to the corrupted partition?

Bob...

Title: Raid Problem
Post by: del on September 08, 2004, 02:31:54 AM

Hi Bob,
Not yet, I will try to get in tomorrow and have a look, then post back here.
Regards,
Del

Title: Raid Problem
Post by: del on September 17, 2004, 05:06:01 AM

Hi All,
OK I finally got power back on Tuesday, I booted up my SME Server, logged on as root and ran /usr/local/bin/raidmonitor -v and got the same result as the email body. I then rebooted and logged back in this time I ran /usr/local/bin/raidmonitor -i and then /usr/local/bin/raidmonitor -v to my surprise it came up clean and I have not had any emails or problems since! So I can only hope that everyting is OK.
Regards,
Del

Title: Raid Problem
Post by: raem on September 17, 2004, 05:28:25 AM

del
> I ran /usr/local/bin/raidmonitor -i and
> then /usr/local/bin/raidmonitor -v


That will just reset the raidmonitor last known good config. If the drives have not synced or a partition is faulty then it will just stay that way.

What does
cat /proc/mdstat
tell you

Title: Raid Problem
Post by: del on September 20, 2004, 10:21:05 PM

Hi Ray,
Thanks for your help, sorry it took so long, but I have been out of town for a couple of days.
It seems that something is not still not right.
==========================================
[root@linux-server root]# cat /proc/mdstat
Personalities : [raid1]
read_ahead 1024 sectors
md2 : active raid1 hda3[0] hdc3[1]
      264512 blocks [2/2] [UU]

md1 : active raid1 hda2[0] hdc2[1]
      59678528 blocks [2/2] [UU]

md0 : active raid1 hdc1[1]
      104320 blocks [2/1] [_U]

unused devices: <none>
==========================
My other problem is that they are both old 30gb HDD's and I can't get a new one to match so I will probably have to buy 2 new ones and reinstall, what do you think?
Regards,
Del  :cry:

Title: Raid Problem
Post by: raem on September 21, 2004, 06:35:55 AM

del

> md0 : active raid1 hdc1[1]
      104320 blocks [2/1] [_U]

.......what do you think?

It seems you don't understand what has happened here and you think it can just go away by resetting the RAID monitor. I don't know why one partition only has failed, I would have thought all partitions on one drive would fail. My only suggestion is to follow the instructions in the HOWTO and try to rebuild the array.

Title: Raid Problem
Post by: gregswallow on September 22, 2004, 11:08:58 PM

Del, try this:

Code: [Select]

/sbin/raidhotadd /dev/md0 /dev/hda1

then

Code: [Select]

raidmonitor -v

it will start re-syncing that partition.  Probably was caused by not rebooting properly...like if the power went out.

When it is done (when you use 'raidmonitor -v' and have [UU], not [_U]) then  do this:

Code: [Select]

raidmonitor -iv



Greg

Title: Raid Problem
Post by: mbachmann on September 23, 2004, 12:28:25 PM

after raidhotadd issue

Code: [Select]

cat /proc/mdstat

to watch the ongoing recovery process