Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: cbakken on October 20, 2004, 10:50:08 AM

Title: Error when applying FTP settings
Post by: cbakken on October 20, 2004, 10:50:08 AM

Hi,
I just installed SMEserver 6.0.1. I want to set up an FTP-server for access from the internet. When I go into Security/Remote Access and set Allow public access (Entire internet) and  Accept passwords from anywhere and click Save, I get this error:
Operation status report
Error occurred while updating system configuration.

Have anyone else seen this?

tia
cbakken, Norway

Title: Error when applying FTP settings
Post by: guest22 on November 26, 2004, 01:04:35 AM

Nope, all works fine here. Any more info/feedback?

Title: Yeah.
Post by: cbakken on November 26, 2004, 02:27:10 PM

I've recently installed SMEserver 6.0.1 on four different boxes, and get the same error on all of them. The strange thing is that everything works as it should afterwards, I can ftp to the boxes from the internet.

But the error message when applying these settings still remains......

I applly the settings on a clean install, so previous suggestions about patches and so on doesn't apply.

Title: Error when applying FTP settings
Post by: paul_sc on December 07, 2004, 07:05:34 PM

I get the same thing cbakken. I noticed this when i disable secure shell settings. I have not tried with ftp yet, but i will

Title: Re: Error when applying FTP settings
Post by: CharlieBrady on December 24, 2004, 06:10:40 PM

Quote from: "cbakken"

Hi,
I just installed SMEserver 6.0.1. I want to set up an FTP-server for access from the internet. When I go into Security/Remote Access and set Allow public access (Entire internet) and  Accept passwords from anywhere and click Save, I get this error:
Operation status report
Error occurred while updating system configuration.

Please report your problem in the Bug tracker. When you do, look back through all the /var/log/httpd/admin_error_log* log files - the details of the error will likely be recorded there.

Title: Error when applying FTP settings
Post by: paul_sc on December 27, 2004, 07:49:04 AM

After adding an IP to the remote management network and clicking on save...I get the failure box in server-manager and the following lines in my admin error log

Is this something that still needs to be reported? I thought I saw threads a while back to disregard the formMagic errors.

[Mon Dec 27 01:35:15 2004] [notice] SIGUSR1 received.  Doing graceful restart
[Mon Dec 27 01:35:16 2004] [notice] Apache configured -- resuming normal operations
[Mon Dec 27 01:35:16 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Mon Dec 27 01:35:16 2004] [notice] Accept mutex: sysvsem (Default: sysvsem)
print() on unopened filehandle esmith::FormMagick::LOG at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 401, <DATA> line 1.
print() on unopened filehandle esmith::FormMagick::LOG at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 401, <DATA> line 1.
print() on unopened filehandle esmith::FormMagick::LOG at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 401, <DATA> line 1.
Use of uninitialized value in concatenation (.) or string at /etc/e-smith/web/panels/manager/cgi-bin/viewlogfiles line 301.
print() on unopened filehandle esmith::FormMagick::LOG at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 401, <DATA> line 1.
[Mon Dec 27 01:42:48 2004] [notice] SIGUSR1 received.  Doing graceful restart
[Mon Dec 27 01:42:48 2004] [notice] Apache configured -- resuming normal operations
[Mon Dec 27 01:42:48 2004] [notice] suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Mon Dec 27 01:42:48 2004] [notice] Accept mutex: sysvsem (Default: sysvsem)
print() on unopened filehandle esmith::FormMagick::LOG at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 401, <DATA> line 1.
print() on unopened filehandle esmith::FormMagick::LOG at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 401, <DATA> line 1.
print() on unopened filehandle esmith::FormMagick::LOG at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 401, <DATA> line 1.
print() on unopened filehandle esmith::FormMagick::LOG at /usr/lib/perl5/site_perl/esmith/FormMagick.pm line 401, <DATA> line 1.

Title: Error when applying FTP settings
Post by: CharlieBrady on January 04, 2005, 05:17:36 AM

Quote from: "paul_sc"

After adding an IP to the remote management network and clicking on save...I get the failure box in server-manager and the following lines in my admin error log

Is this something that still needs to be reported?

Anything which doesn't work correctly should be reported.