Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: Magnus on November 04, 2004, 01:04:45 AM

Title: Adding a extra hdd!
Post by: Magnus on November 04, 2004, 01:04:45 AM

Hi.
I´m running e-smith 6 on a P4
i´m trying to add a extra hdd, it´s 250gb
i have tried with http://mirror.contribs.org/smeserver/contribs/mblotwijk/HowToGuides/AddExtraHardDisk.htm

but i cant make it work.. the disc will only be 7.6mb large.
Do any one know how to make it work?

Thanx

Magnus

Title: we need more info!
Post by: HomePlayer on November 04, 2004, 11:39:00 AM

what is the output if you do #  df -T
do you have phpsysinfo installed what does that tell you?
what do you see if you do
# fdisk /dev/haX (X is the drive)
in fdisk type --> p (enter)

Title: Adding a extra hdd!
Post by: Magnus on November 04, 2004, 12:16:30 PM

Filesystem    Type   1k-blocks      Used Available Use% Mounted on
/dev/hda3     ext3     7756100    709364   6652744  10% /
/dev/hda1     ext3      101089     14053     81817  15% /boot
none         tmpfs      123752         0    123752   0% /dev/shm
/dev/hdb1     ext3        7776      1043      6332  15% /mnt/big1
/dev/hdc1     ext3   115393704  13420780  96111212  13% /mnt/big2

big1 is the 250gb driver
They funny thing is it showing the right size in fdisk. but not after.

Title: Adding a extra hdd!
Post by: RavenIV on November 05, 2004, 12:31:54 AM

do you have more than one partition on "big1"?
is your drive OK, test it with the tools from the manufacturer.
does your bios recognize the drive correct?

cheers

Title: Adding a extra hdd!
Post by: Magnus on November 05, 2004, 01:44:48 AM

i installed e-smith on the 250gb disk instead.
No problems..

going to add the other disc´s instead.