Koozali.org: home of the SME Server
Legacy Forums => General Discussion (Legacy) => Topic started by: hanvc on November 04, 2004, 03:32:44 PM
-
SME 5.6
Below an error that's been send to admin every 15 minutes.
What's going on and how to solve?
ALARM! RAID configuration problem
Current configuration is:
Personalities : [raid1]
read_ahead 1024 sectors
md0 : active raid1 sdb1[1] sda1[0]
104320 blocks [2/2] [UU]
md1 : active raid1 sdb2[1] sda2[0]
35190272 blocks [2/2] [UU]
md2 : active raid1 sdb3[1] sda3[0]
264960 blocks [2/2] [UU]
unused devices: <none>
Last known good configuration was:
Personalities : [raid1]
read_ahead 1024 sectors
md0 : active raid1 sdb1[1] sda1[0]
104320 blocks [2/2] [UU]
md1 : active raid1 sdb2[1] sda2[0]
35190272 blocks [2/2] [UU]
[===========>.........] resync = 58.5% (20617688/35190272) finish=33.6min speed=7210K/sec
md2 : active raid1 sdb3[1] sda3[0]
264960 blocks [2/2] [UU]
unused devices: <none>
-
Your raid config is working and both disks are used.
re-initialize raidmonitor:
/usr/local/bin/raidmonitor -iv