Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: bobbymcgee on December 10, 2004, 09:07:57 PM

Title: network card + driver
Post by: bobbymcgee on December 10, 2004, 09:07:57 PM

Hi

I've just installed SME Server v6.0u onto a computer and I'm having an issue with the network adapter.  The adapter is an Intel PRO/1000 CT which is right on the motherboard.  Unfortunately, the server manager doesn't automatically detect it.  To work around it I slapped in a D-Link DFE-538TX.  

Can someone give me some tips on how I would go about getting the driver for the Intel PRO/1000 CT adapter and setting it up?  I also better mention that I'm a linux/unix novice.

Title: network card + driver
Post by: briank on December 11, 2004, 07:17:40 PM

Hi
I thought the Intel gigigabit (e1000) driver was installed in V6. If not see http://forums.contribs.org/index.php?topic=24804.0
and
http://forums.contribs.org/index.php?topic=21155.0
After install go through the setup again as admin and manually choose the e1000 driver for the onboard card if it isn't now detected.
Goodluck
Brian

Title: network card + driver
Post by: bobbymcgee on December 13, 2004, 03:40:10 PM

Hi Brian,

I took out the d-link, set the driver to the e1000, rebooted her and it's working fine.  Thanks for the help.

Steve

Title: big help
Post by: treyh on April 14, 2005, 11:00:03 PM

I had a similiar problem.

motherboard = P4SCI
NIC = dual, onboard, gigabit, intel 825541 and intel 82547GI CSA

SME didn't automatically detect them. I downloaded driver:
e1000-5.2.22-sme6.i386.rpm
from:
http://mirror.contribs.org/smeserver/contribs/index.php?subdir=dmay%2Fsmeserver%2F6.x%2Fcontrib%2Fintel&sortby=name

installed it (rpm -Uvh filename), ran through the configuration again, selected the e1000 intel driver that had the closest part # and it worked like a charm.

Just thought that I would share my experience