Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: vikibaby on December 20, 2004, 02:02:04 PM

Title: newbie question
Post by: vikibaby on December 20, 2004, 02:02:04 PM

Hi!
Is it possible to add another HDD (or a RAID-1 pair of HDDs) to my server after the installation. (so i would like to install an HDD, when the first disk is full) Has SME Server got a standard method to add an HDD, or I have to configure it manually from the consol?

Title: newbie question
Post by: wyron on December 20, 2004, 02:45:43 PM

A question parallel to yours was up just the other day..: http://forums.contribs.org/index.php?topic=25224.0
A simple search, however, might have revealed this howto..: http://no.longer.valid/phpwiki/index.php?pagename=extra%20hard%20disk . . which by the way is referred to in the same post.
Good luck !

Title: newbie question
Post by: CKConsulting on December 21, 2004, 04:26:33 AM

I may have missed something on the links but I didn't see if it was possible to create a raid1 set to an existing SME server?

Rick

Title: newbie question
Post by: wyron on December 21, 2004, 10:44:15 AM

All right, then.
Lets try something different.
Have you seen this post: http://forums.contribs.org/index.php?topic=4416.0
That, and the referred link should do the trick.
Good luck!

Title: newbie question
Post by: CKConsulting on December 21, 2004, 02:40:14 PM

Thank you, I had read that and figured it was just for replacing a bad drive of a current Raid1 set.  But I guess you can create a raid1 set with the same steps.

Thanks for your help.
I'm from Missouri so some times you have to "Show Me"

Rick