Koozali.org: home of the SME Server
Legacy Forums => Experienced User Forum => Topic started by: evikali on December 29, 2004, 09:19:33 AM
-
hi there
If I want my vpn software client to see the shares (ibay) on my server (sme 6.0) can I then do that without using "local networks" Can I make a "bridge" between the two ?
-
Try setting the "Wins client" Ip address of the VPN network connection to the Ip address of the SME server.
I have also tried the Samba 3 rpms, and that seemed to help as well. however I can't find a link to them now.
Your mileage may vary....
-
If you still want to bridge, check the OpenVPN thread.
OpenVPN includes a bridge startup script that worked for me.(/usr/share/openvpn/sample-scripts) You only have to install bridge-utils-0.9.6-46.i586.rpm (www.rpmfind.net)
-
Appesteijn,
Can you give some insite on hou you made bridging work?
Thanks
Bob
-
hi there
If I want my vpn software client to see the shares (ibay) on my server (sme 6.0) can I then do that without using "local networks" Can I make a "bridge" between the two ?
Standard Windows VPN's can!
Ed Form
-
Standard Windows VPN's can!
Yes, let's compare Windows with sme :hammer:
If you still want to bridge, check the OpenVPN thread
I couldn't find that one just now, and the howto at swerts-knudsen.dk won't come up :roll:
Do you have link to that thread?
Might be an idea to create some sort of howto for OpenVPN, which seems really popular, right here on contribs..?
-
Standard Windows VPN's can!
Yes, let's compare Windows with sme :hammer:
I wasn't. If you read the original post you'll see that the questioner wanted to make his VPN "client" see shares on his server. I read that to mean that the client machine [ie workstation] from which the VPN is originated should be able to connect to ibay shares. Windows client machines can, with no alterations except using a valid username and password.
Ed Form
-
..no flame intended there...
Well, if windows is able to connect to those shares anyway.. there wouldn't be a problem?
Evikali, just wondering, what client are you using?