Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: mhr on January 14, 2005, 11:59:08 PM

Title: Installing mplayer
Post by: mhr on January 14, 2005, 11:59:08 PM
For the archives: a little "howto install mplayer on a sme 6.0.1 box".

Background:
I'm running SlimServer (http://www.slimdevices.com) on my server and wanted to use the latest AlienBBC plugin which allows streaming realplayer streams to the SqueezBox. This plugin uses mplayer for the conversion.

Problem:
There's no recent mplayer around which would run on a stripped down box as is sme 6.0 (tons of other rpms required). And there are no dev tools on that distro. And the latest mplayer source does not like the gcc 2.96 which is available for it, but asks for gcc-3.2.x...

Solution:
1. Install the dev-tools http://no.longer.valid/mylinks/viewcat.php?cid=79
2. Install gcc-3.2.x
http://ftp://ftp.club-internet.fr/pub/gcc/gcc-3.2.3/gcc-core-3.2.3.tar.gz (you only need the -core- stuff!), untar in your folder of choice,
Code: [Select]
tar -xvzf gcc-core-XXX.tar.gz[/list]
Code: [Select]
mkdir gcc-build
cd gcc-build
../gcc-3.XXX/configure --prefix=/usr/local/gcc3

The --prefix is very important as you want to install gcc-3 alongside the existing compiler! Compile and install gcc:
Code: [Select]
make bootstrap
make install[/list]
3. Build mplayer
http://www.mplayerhq.hu/homepage/design7/dload.html[/list]
http://www.mplayerhq.hu/MPlayer/releases/codecs/, eg. rp9codecs-20040626.tar.bz2, untar and install the codec:
Code: [Select]
tar -xjf rp9codecs-20040626.tar.bz2
mv rp9codecs-20040626 /usr/local/lib/codecs
Untar the mplayer sourc:
Code: [Select]
tar -xjf MPlayer-xyz.tar.bz2
cd MPlayer-xyz
Prepare the mplayer compilation: disable anything you don't need, especially all the video stuff - my sme6 is running headless...
Code: [Select]
cd
./configure --disable-mencoder --disable-tv --disable-edl --disable-rtc --disable-dvdread --disable-mpdvdkit --disable-cdparanoia --disable-fontconfig --disable-unrarlib --disable-sortsub --disable-ftp --disable-libmpeg2 --disable-vidix --disable-tga --disable-pnm --disable-pnm --disable-md5sum --disable-arts --cc=/usr/local/gcc3/bin/gcc --host-cc=/usr/local/gcc3/bin/gcc --disable-jpeg --disable-gif --disable-liblzo --disable-dvb --disable-sdl --disable-xvid --disable-toolame --disable-mad --disable-png --disable-win32 --disable-macosx --disable-menu
Be sure to correctly define --cc and --host-cc: they must reflect the path you defined when compiling gcc! If everything's fine:
Code: [Select]
make
make install
Test mplayer. If it asks for some 3rd party rpms, verify whether you have disabled everything you don't want. And start again...[/list]

Documentation:




Good luck!

Michael
Title: Re: Installing mplayer
Post by: cnp on December 10, 2005, 09:44:20 AM
Quote from: "mhr"

Solution:
1. Install the dev-tools http://no.longer.valid/mylinks/viewcat.php?cid=79


Being relatively new to Linux I must admit that http://no.longer.valid/mylinks/viewcat.php?cid=79 didn't bring me any further.

It says "Solution: install and run perl digger". But how?

Any help on this would be highly appreciated.

The rest of your howto is very usefull, even for an inexperienced user as myself. Thanks Michael.

Regards
Claus
Title: Installing mplayer
Post by: mhr on December 11, 2005, 07:15:29 PM
Yeah, that link seems rather wrong. Don't know whether it was correct at the time of writing.

A quick search for dev tools brought up the following link:

http://www.eelriver.com/sme/e-smith-devtools-1.12.0-01.noarch.rpm

Good luck!

Michael
Title: Installing mplayer
Post by: cnp on December 12, 2005, 11:26:11 AM
Quote from: "mhr"

http://www.eelriver.com/sme/e-smith-devtools-1.12.0-01.noarch.rpm

Good luck!
Michael


Thanks Michael

I hope that you have the time to help me a bit further on this one.

When I start the compile I notice that the message goes; "Configuring for a i686-pc-linux-gnu host"

Running my SME-Server on VIA EPIA-800 I think that it should have said something with i386 instead.

And that might be why I get the following error messages:
*** The command 'cc -o conftest -g   conftest.c' failed
*** You must set the environment variable CC to a working compiler


Any hints on how I get this working correctly?

Regards
Claus
Title: Installing mplayer
Post by: mhr on December 12, 2005, 11:48:38 AM
Quote from: "cnp"

Running my SME-Server on VIA EPIA-800 I think that it should have said something with i386 instead.


Exactly - I had to do the same (also using the C3/800). I don't know exactly when or where you have to do this, but I think it's when running configure. Run "configure --help" for more information.

Michael