Koozali.org: home of the SME Server
Legacy Forums => General Discussion (Legacy) => Topic started by: achaos on January 20, 2005, 11:09:18 PM
-
Hi all,
First sorry for my bad english,If your will may you help with my language mistake.
I installed motion (http://motion.sourceforge.net) on e-smith 6.5 .
I have the necessary rpm's load to my webspace.
Here is my installationproccess.
[root@chaos motion_esmith]# rpm -Uvh http://www.jv104.easynet.be/motion_esmith/glibc-2.2.5-44.src.rpm
1:glibc ########################################### [100%]
[root@chaos motion_esmith]# rpm -Uvh http://www.jv104.easynet.be/motion_esmith/kernel-headers-2.4.9-34.i386.rpm
Preparing... ########################################### [100%]
1:kernel-headers ########################################### [100%]
[root@chaos motion_esmith]# rpm -Uvh http://www.jv104.easynet.be/motion_esmith/glibc-devel-2.2.5-44.i386.rpm
Preparing... ########################################### [100%]
1:glibc-devel ########################################### [100%]
[root@chaos motion_esmith]# rpm -Uvh http://www.jv104.easynet.be/motion_esmith/libjpeg-devel-6b-19.i386.rpm
Preparing... ########################################### [100%]
1:libjpeg-devel ########################################### [100%]
[root@chaos motion_esmith]# rpm -Uvh http://www.jv104.easynet.be/motion_esmith/zlib-devel-1.1.4-8.7x.i386.rpm
Preparing... ########################################### [100%]
1:zlib-devel ########################################### [100%]
[root@chaos motion_esmith]# rpm -Uvh http://www.jv104.easynet.be/motion_esmith/cpp-2.96-110.i386.rpm
Preparing... ########################################### [100%]
1:cpp ########################################### [100%]
[root@chaos motion_esmith]# rpm -Uvh http://www.jv104.easynet.be/motion_esmith/gcc-2.96-110.i386.rpm
Preparing... ########################################### [100%]
1:gcc ########################################### [100%]
[root@chaos motion_esmith]# cd /usr/local/
[root@chaos local]# wget http://www.jv104.easynet.be/motion_esmith/motion-3.1.17.tar.gz
[root@chaos local]# tar -xvzf motion-3.1.17.tar.gz
[root@chaos local]# ln -s motion-3.1.17 motion
[root@chaos local]# cd motion
[root@chaos motion]# ./configure
[root@chaos motion]# make
[root@chaos motion]# make install
Take care that your webcam or videokaart works:
-I have an usb philips webcam (PCVC675K "Vesta")
modprobe pwc & insmod -f pwcx.o (downloaded of http://www.smcc.demon.nl/webcam )
-my pinnacle Tv-card becomes under 6.5 standard recognizes
I made an ibay that "motion" names.
I want to come with next command "motion -t /home/e-smith/files/ibays/motion/html/pictures"
De photographs in the right place now in this file.
You can adapt now also in /etc/motion/etc the line motion-dist.conf and name motion.conf .
Above the minimum is, but you can let make there of everything with o. a. films.
suggestions or improvements are welcome
greetings achaos
-
Hi achaos,
could you explain more the installation process for your webcam driver ? :
modprobe pwc & insmod -f pwcx.o (downloaded of http://www.smcc.demon.nl/webcam )
i went on this link and didn't understand everything there.
did you patch the kernel, was it needed ?
how can i get this file pwcx.o ? or make it with the lib inside the tar file ?
thanks for help.
-
Hi achaos,
could you explain more the installation process for your webcam driver ? :
modprobe pwc & insmod -f pwcx.o (downloaded of http://www.smcc.demon.nl/webcam )
i went on this link and didn't understand everything there.
did you patch the kernel, was it needed ?
how can i get this file pwcx.o ? or make it with the lib inside the tar file ?
thanks for help.
hi fred,
you can look at this link http://www.lavrsen.dk/twiki/bin/view/PWC/WebHome?CGISESSID=89ef42d05433129fbc83c373e46dd9e9&CGISESSID=89ef42d05433129fbc83c373e46dd9e9
there is a manual
-
thansk achaos for the link,
but i can't handle all that stuffs...
too hard for me.
do i need to recompile the kernel ?
i tried to compile the source codes as explained with the "make" install, but i got this :
make -C /lib/modules/2.4.20-37.7.legacysmp/build SUBDIRS=/home/e-smith/files/ibays/Primary/files/pwc-10.0.6a modules
make: *** /lib/modules/2.4.20-37.7.legacysmp/build: Aucun fichier ou répertoire de ce type. Arrêt.
make: *** [default] Erreur 2
the file or directory is missing or empty ? my install is on a dual celeron (so smp version
do i need to install SME kernel source codes ?
is there anywhere an install explanation for the SME ?
could you explain how you got your pwcx.o file ?
thanks again.
-
thansk achaos for the link,
but i can't handle all that stuffs...
too hard for me.
do i need to recompile the kernel ?
i tried to compile the source codes as explained with the "make" install, but i got this :
make -C /lib/modules/2.4.20-37.7.legacysmp/build SUBDIRS=/home/e-smith/files/ibays/Primary/files/pwc-10.0.6a modules
make: *** /lib/modules/2.4.20-37.7.legacysmp/build: Aucun fichier ou répertoire de ce type. Arrêt.
make: *** [default] Erreur 2
the file or directory is missing or empty ? my install is on a dual celeron (so smp version
do i need to install SME kernel source codes ?
is there anywhere an install explanation for the SME ?
could you explain how you got your pwcx.o file ?
thanks again.
ok
No you must not compile the kernel.
login with putty
Here is a copy /paste to load the modules
login as: root
Sent username "root"
root@chaos's password:
Last login: Mon Mar 21 23:49:54 2005 from pc-00034.achaos.org
Welcome to SME Server 6.5
[root@chaos root]# wget http://www.jv104.easynet.be/motion_esmith/pwcx.o
--23:52:06-- http://www.jv104.easynet.be/motion_esmith/pwcx.o
=> pwcx.o'
Resolving www.jv104.easynet.be... 212.100.160.82
Connecting to www.jv104.easynet.be[212.100.160.82]:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 47,575 [text/plain]
100%[====================================>] 47,575 274.35K/s
23:52:07 (274.14 KB/s) - pwcx.o' saved [47575/47575]
[root@chaos root]# modprobe pwc
[root@chaos root]# insmod -f pwcx.o
Warning: kernel-module version mismatch
pwcx.o was compiled for kernel version 2.4.23
while this kernel is version 2.4.20-37.7.legacysmp
Warning: loading pwcx.o will taint the kernel: non-GPL license - Proprietary. See http://www.smcc.demon.nl/webcam/tainting.html
See http://www.tux.org/lkml/#export-tainted for information about tainted modules
Warning: loading pwcx.o will taint the kernel: forced load
Module pwcx loaded, with warnings
Good luck and tell if it works.