Koozali.org: home of the SME Server
Legacy Forums => Experienced User Forum => Topic started by: zoran on February 18, 2005, 04:49:41 AM
-
I installed mrtg using the following:
http://sme.swerts-knudsen.dk/index.html?frame=http%3A//sme.swerts-knudsen.dk/howtos/howto_6.htm
But now I'm getting a cron message every 5 mins about snmp that isn't responding. Here is a snippet:
SNMP Error:
no response received
SNMPv1_Session (remote host: "localhost" [127.0.0.1].161)
community: "public"
request ID: 166997335
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/bin/../lib/mrtg2/SNMP_util.pm line 450
SNMPGET Problem for dskPercent.1 dskPercent.1 sysUptime sysName on public@localhost
at /usr/bin/mrtg line 1491
WARNING: Expected a number but got ''
WARNING: Expected a number but got ''
What do I do? how can I either fix this or remove the mrtg package as a whole?
Zoran
-
zoran,
Did you run the manual or automatic installation?
You can uninstall by removing:
/etc/e-smith/templates-custom/etc/crontab/mrtg
and then run
/sbin/e-smith/expand-template /etc/crontab
Then you can remove the ibay again.
-
I did the automatic install, but it was wierd, after a reboot, those erros went away, and mrtg is running normally. Thanky very much!!!
Last question on this.. In the admin panle of /server-manager it get listed at the bottom under an Unknown category. how do I move that to the Administration category?
-
Run the following command:
/etc/e-smith/events/actions/navigation-conf
You will see a bunch of errors, but this will fix the problem.
-
That did it! I totally appreciate your time on this!
All is well, and I an extremely happy again!
Zoran