Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: edb on April 12, 2005, 03:20:06 AM

Title: Asterisk on SME 6.0.1
Post by: edb on April 12, 2005, 03:20:06 AM
Does anyone have a HowTo for the newest Asterisk for SME server 6.0.1?
Sure would appreciate one  :-)

Thanks in advance

Ed
Title: Asterisk on SME 6.0.1
Post by: edb on April 12, 2005, 05:19:02 AM
Never mind  :roll:

Ask and you shall receive ... I found a very helpful thread  ;-) http://forums.contribs.org/index.php?topic=20617.0
Title: Asterisk on SME 6.0.1
Post by: funkusmunkus on April 12, 2005, 05:53:09 AM
As soon as I saw you post I thought about that thread, but reread your post and thought he must be after the
Quote
newest"

and that wouldn't be the newest, seeing as I haven't looked at it.

I'll start posting first and asking questions later  :-P
Title: Asterisk on SME 6.0.1
Post by: BoZz on April 12, 2005, 01:21:39 PM
If you want a turn key solution for Asterisk try here http://asteriskathome.sourceforge.net/ It's the e-smith of VOIP.

CYA,

Brett :-)
Title: Asterisk on SME 6.0.1
Post by: duncan on April 12, 2005, 01:49:25 PM
If you want a turn key solution full stop then you cant go past something like this (http://www.epygi.com/2x.htm).

Gateway
IPSec and pptp vpn
Inbound outbound QOS
Voip with FXS and FXO ports - SIP.
Voicemail with mail notification

And it will cost less than building the same from scratch with *
Title: Asterisk on SME 6.0.1
Post by: edb on April 12, 2005, 03:51:16 PM
That's beautiful   :-D
Thanks BoZz and Duncan for two excellent suggestions.

Ed
Title: Asterisk on SME 6.0.1
Post by: Franco on April 13, 2005, 02:21:31 PM
Duncan,
These are great products, and coming from you I'm sure they'll be awesome. But where can I get the prices, and buy them?

Thanks,
Franco
Title: Asterisk on SME 6.0.1
Post by: duncan on April 13, 2005, 03:49:01 PM
Quote from: "stuntshell"
Duncan,
These are great products, and coming from you I'm sure they'll be awesome. But where can I get the prices, and buy them?

Thanks,
Franco


Are you in Aus?
Title: Asterisk on SME 6.0.1
Post by: cydonia on April 13, 2005, 04:00:24 PM
Those devices over *?  Is it as powerfull, flexible or scaleable?

Seems like a good option for a home turn-key solution, have you had a play with them?


Tristan


Quote from: "duncan"
If you want a turn key solution full stop then you cant go past something like this (http://www.epygi.com/2x.htm).

Gateway
IPSec and pptp vpn
Inbound outbound QOS
Voip with FXS and FXO ports - SIP.
Voicemail with mail notification

And it will cost less than building the same from scratch with *
Title: Asterisk on SME 6.0.1
Post by: Franco on April 15, 2005, 06:04:21 AM
Quote from: "duncan"


Are you in Aus?


I'm in Brazil, South America right now. I keep myself back and forth between here and Italy.
Will it be difficult for me to get them in these places?

Regards,
Title: Asterisk on SME 6.0.1
Post by: duncan on April 15, 2005, 01:36:54 PM
Quote from: "stuntshell"
Quote from: "duncan"


Are you in Aus?


I'm in Brazil, South America right now. I keep myself back and forth between here and Italy.
Will it be difficult for me to get them in these places?

Regards,


Not sure - I guess you will be able to find them somewhere on the net.

For any Aussies - the local guy is Netopt (http://www.netopt.com.au/) - does some nice load balancing gear as well.
Title: Asterisk on SME 6.0.1
Post by: cydonia on May 28, 2005, 05:31:10 PM
Quote from: "duncan"
If you want a turn key solution full stop then you cant go past something like this (http://www.epygi.com/2x.htm).

Gateway
IPSec and pptp vpn
Inbound outbound QOS
Voip with FXS and FXO ports - SIP.
Voicemail with mail notification

And it will cost less than building the same from scratch with *



Man, similar devices are popping up all over the place in Aus now...  Draytek, Linksys and more offer the same sort of hardware.

I have considered this for an upcoming, medium sized VoIP rollout.  Asterisk is just a bit more flexible and scaleable though...
Title: Asterisk on SME 6.0.1
Post by: guest22 on May 30, 2005, 10:47:18 PM
Quote from: "cydonia"
Asterisk is just a bit more flexible and scaleable though...


A bit... ? Heaps! ;-)
Title: Asterisk on SME 6.0.1
Post by: duncan on May 31, 2005, 01:28:08 AM
Quote from: "guest22"
Quote from: "cydonia"
Asterisk is just a bit more flexible and scaleable though...


A bit... ? Heaps! ;-)


 :-) I would debate that.

We are currently looking at an Alcatel (http://www.alcatel.com/smb/en/products/omnipcxoffice/convergedcommunication/;jsessionid=1PZRQMOB3CC3CCTFR0GU1DIKMWHI23GC?_requestid=28726#intranet) solution that as well as being an Voip enabled pabx - takes on the role of file-mail and intranet/internet server.
Title: Asterisk on SME 6.0.1
Post by: guest22 on May 31, 2005, 11:42:50 AM
Quote from: "duncan"

We are currently looking at an Alcatel (http://www.alcatel.com/smb/en/products/omnipcxoffice/convergedcommunication/;jsessionid=1PZRQMOB3CC3CCTFR0GU1DIKMWHI23GC?_requestid=28726#intranet) solution that as well as being an Voip enabled pabx - takes on the role of file-mail and intranet/internet server.


Kind of a SME Server with VoIP installed? ;-)
Title: Zaptel Card
Post by: jacobsweb on May 31, 2005, 01:09:01 PM
HI has anyone had any luck installing a zaptel card?

I followed duncan's how to but n loading asterisk i get the following error message.

[chan_zap.so]May 31 21:06:40 WARNING[16384]: loader.c:248 ast_load_resource: libpri.so.1: cannot open shared object file: No such file or directory
May 31 21:06:40 WARNING[16384]: loader.c:429 load_modules: Loading module chan_zap.so failed!


any ideas?

i have managed to setup alot of things but i need step by step instructions for somthing to work first time round and if it doesnt work... god help me :)
Title: Asterisk on SME 6.0.1
Post by: cydonia on May 31, 2005, 04:12:34 PM
Quote from: "duncan"

We are currently looking at an Alcatel (http://www.alcatel.com/smb/en/products/omnipcxoffice/convergedcommunication/;jsessionid=1PZRQMOB3CC3CCTFR0GU1DIKMWHI23GC?_requestid=28726#intranet) solution that as well as being an Voip enabled pabx - takes on the role of file-mail and intranet/internet server.


As RequestedDeletion said, SME or linux would do this also as you know.  I guess it comes down to vendor support, and being a turn-key solution, which linux and SME clearly are not.
Title: Re: Zaptel Card
Post by: cydonia on May 31, 2005, 04:16:27 PM
Quote from: "jacobsweb"


[chan_zap.so]May 31 21:06:40 WARNING[16384]: loader.c:248 ast_load_resource: libpri.so.1: cannot open shared object file: No such file or directory
May 31 21:06:40 WARNING[16384]: loader.c:429 load_modules: Loading module chan_zap.so failed!




Did you follow the order of zaptel -> libpri -> asterisk?  Sounds like asterisk is looking for libpri and zaptel and they're not there...
Title: Re: Zaptel Card
Post by: jacobsweb on June 01, 2005, 07:35:02 AM
Quote from: "cydonia"



Did you follow the order of zaptel -> libpri -> asterisk?  Sounds like asterisk is looking for libpri and zaptel and they're not there...



i thought i did, anyhow i went though the process again and now im getting this error....

[chan_zap.so]Jun  1 15:32:47 WARNING[16384]: loader.c:248 ast_load_resource: /usr/lib/asterisk/modules/chan_zap.so:
undefined symbol: pri_dump_info
Jun  1 15:32:47 WARNING[16384]: loader.c:429 load_modules: Loading module chan_zap.so failed!


any ideas on that one?
Title: Asterisk on SME 6.0.1
Post by: cydonia on June 03, 2005, 02:41:10 PM
Not sure then to be honest.

Just make sure you've got all the devels I guess.  Try posting to the mailing list (or searching it).


Cheers.
Title: Asterisk on SME 6.0.1
Post by: jacobsweb on June 03, 2005, 03:18:27 PM
yeah i figured out the issues, in correct version. however now every time i get a call on the zaptel chanel it locks the computer up! great when you have a 600Gb raid 5 array that i has to check though
Title: Asterisk on SME 6.0.1
Post by: bjoyce on June 09, 2005, 07:51:26 AM
Quote
every time i get a call on the zaptel chanel it locks the computer up! great when you have a 600Gb raid 5 array that i has to check though


I have heard that there are issues with asterisk and scsi.  Once moved from a raid drive to a striaght IDE single HDD it worked fine.

Brad
Title: Asterisk on SME 6.0.1
Post by: albatroz on June 10, 2005, 01:54:43 AM
Duncan,
I am in Peru, if you need an Asterisk box, we could
arrange something to send it preconfigured.

Quote from: "stuntshell"
Quote from: "duncan"


Are you in Aus?


I'm in Brazil, South America right now. I keep myself back and forth between here and Italy.
Will it be difficult for me to get them in these places?

Regards,