Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: Yency_Rafael on August 05, 2005, 05:15:23 PM

Title: Internet Problem
Post by: Yency_Rafael on August 05, 2005, 05:15:23 PM

Hello i just configured sme server 6.5
the local address is:65.38.210.16
the external address is:65.38.210.17
and the internet gateway is :65.38.210.9

but when i ping the gateway from the console in the server i got, destination unavilable

i have an pool of 5 address for the internet
but the 65.38.210.9 is the gateway,

how could i fix this issue?

Title: Internet Problem
Post by: guest22 on August 05, 2005, 11:08:13 PM

Hi,

It seems to me that using a public IP address in a local private LAN is a violation of the 'rules' for LAN or WAN usage.

Try changing you local IP address into e.g. 192.168.1.1

Most of the time the external gatway address end in a '1' not a nine, play with that too.

guest

Title: Internet Problem
Post by: Yency_Rafael on August 06, 2005, 07:54:31 PM

i changed the address to
ip;10.0.0.4
gateway;10.0.0.1
external address;10.0.0.5

i connect the router directly to the network card that work as external address eth1 but the internet dosen't work, but when i connect the router to a switch and the nic to that switch to the internet works fine, i wonder is the way should be working or there's something wrong in the configuration.

Title: Internet Problem
Post by: duncan on August 07, 2005, 02:07:36 AM

Quote from: "Yency_Rafael"

i changed the address to
external address;10.0.0.5

Same subnet as your Lan. How about 10.0.1.5.

Title: Re: Internet Problem
Post by: gordonr on August 08, 2005, 08:44:50 AM

Quote from: "Yency_Rafael"

Hello i just configured sme server 6.5
the local address is:65.38.210.16
the external address is:65.38.210.17
and the internet gateway is :65.38.210.9

Your external network needs to be different from your internal network.

Quote from: "Yency_Rafael"

but when i ping the gateway from the console in the server i got, destination unavilable

The system can't determine internal from external.

Quote from: "Yency_Rafael"

i have an pool of 5 address for the internet
but the 65.38.210.9 is the gateway,

how could i fix this issue?

Use one of the provided addresses for the external interface, specify the gateway as required, and use an RFC1918 private address for the internal network. Check the manual.

BTW: This really isn't an "Experienced User Forum" question.