Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: Patrick Schepers on November 22, 2001, 04:34:45 AM

Title: external ISDN MODEM TA-200ST
Post by: Patrick Schepers on November 22, 2001, 04:34:45 AM

Can anyone help me to configure my external ISDN modem
Asuscom TA-200ST on v5.0

Thanks

Title: Re: external ISDN MODEM TA-200ST
Post by: Tim Haynes on November 23, 2001, 03:38:08 PM

I have successfully used on of these on e-smith 4.1.2.  You need to configure the init string on the isdn adapter to default it to the correct parameters i.e. 64kbps single channel - so that when e-smith sends ATZ the isdn adapter initialises properly. You then just treat it (as far as e-smith is concerned) as an external modem.

Do a search on google and you should find the init strings required and how to configure - let me know if not and I will dig it out and send to you.

Regards,
Tim.

Title: Re: external ISDN MODEM TA-200ST
Post by: Ken Duffield on November 25, 2001, 07:31:02 PM

Try putting in init string b4 or b42 as this works for me. I use b4 for single and b42 for bandwidth on demand.

Rgds

Ken

Title: Re: external ISDN MODEM TA-200ST
Post by: Patrick Schepers on November 28, 2001, 08:23:51 PM

I've tried everything

here are my settings of Profile 0

E1 Q0 V1 X1 &C1 &E0 &K3 #C0 B04

With minicom the TA dials out just fine (ATD nr.....)

What is wrong???

Rgrds Patrick

Tim Haynes wrote:
>
> I have successfully used on of these on e-smith 4.1.2.  You
> need to configure the init string on the isdn adapter to
> default it to the correct parameters i.e. 64kbps single
> channel - so that when e-smith sends ATZ the isdn adapter
> initialises properly. You then just treat it (as far as
> e-smith is concerned) as an external modem.
>
> Do a search on google and you should find the init strings
> required and how to configure - let me know if not and I will
> dig it out and send to you.
>
> Regards,
> Tim.