Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: davide on October 19, 2005, 01:33:13 AM

Title: Problems withe the correct Network configuration
Post by: davide on October 19, 2005, 01:33:13 AM
Hi
My name is Davide
I’d like to ask you some information about the proper configuration of my  sme server.
I found it very powerfull and stable, but I have a little problem about the configuration.

My network is so configured:
IP static for the SERVER and the PC and all the network resources

Pc have IP like       192.168,0,2 – 240 ( they are 30 pc )
SME Server have the    192.168.0.250
ROUTER for Internet    192,168,0,1 like default gateway .the also give the DNS Service

My ISP , give me an IP , dynamically,  and I have an ADSL ….


Now the problem is ..

I’d like to use the Squid proxy server of your SME Distribution, but now I wont be able to surf the internet , I configured the browser with the correct info.

After a long time , the SQUID ( sme ) returns me .. unable to contact the url.
I tried to use  the PPOE configuration or The STATIC IP. But I did not solved the problem.
 
( maybe this is due my incapacita’ )
I ‘d like to have some info to configure the server

Thankyou


 
The configuration of the SME Server is
Review configuration
Networking Parameters
Server Mode   servergateway
Local IP address / subnet mask   192.168.0.251/255.255.255.0
External IP address / subnet mask   82.48.30.121 – forced by me
Additional local networks   192.168.0.0/255.255.255.0
DHCP server   disabled
Server names
DNS server   192.168.0.251  --may be this it the problem
Web server   www.sessione
Proxy server   proxy.sessione:3128
FTP server   ftp.sessione
SMTP, POP, and IMAP mail servers   mail.sessione
Domain information
Primary domain   sessione
Virtual domains   sessione
Primary web site   http://www.sessione
Server manager   http://sme/server-manager/
User password panel   http://sme/user-password/
Email Addresses   useraccount@sessione
firstname.lastname@sessione
firstname_lastname@sessione
________________________________________
Title: Re: Problems withe the correct Network configuration
Post by: duncan on October 19, 2005, 10:21:27 AM
Quote from: "davide"

DNS server   192.168.0.251  --may be this it the problem


Most likely - try setting it to the router (192.168.0.1) or even your ISP DNS server.
Title: Re: Problems withe the correct Network configuration
Post by: kuyaz on December 04, 2005, 01:53:14 PM
Quote from: "duncan"


Most likely - try setting it to the router (192.168.0.1) or even your ISP DNS server.


I'm having this problem as well. How do you change the DNS Server address. Currently sme is pointing to itself as the dns server, when it should be either pointing to an external DNS or at least the gateway/router. I used to have sme 5.x which ran fine, but I just upgraded to 6.0 and 6.5 and still get the same issue.

In 5.x, in the setup options there was a place to set the external DNS address, but not in the 6.x releases. I would have the sme box as the dns server, the router as the gateway and dhcp server. Whenever there is a webrequest internally, it would look to the sme server, which inturn gets the dns information from an external dns server.