Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: shto on October 22, 2005, 09:28:35 PM

Title: can't send mail
Post by: shto on October 22, 2005, 09:28:35 PM
Hi,
i have these qmail error:
Quote
1130007461.955973500 qp 2799: to=xxxx@xxx.com, uid=406, ddelay=14407.279092, xdelay=6.097462, stat=Deferred (Sorry,_I_wasn't_able_to_establish_an_SMTP_connection._(#4.4.1)/)


I can,t send remote mail ?!! why ?  :roll:

10x!
Title: Re: can't send mail
Post by: hamdta on October 24, 2005, 08:37:03 PM
Hi

Quote from: "shto"
Hi,
i have these qmail error:
Quote
1130007461.955973500 qp 2799: to=xxxx@xxx.com, uid=406, ddelay=14407.279092, xdelay=6.097462, stat=Deferred (Sorry,_I_wasn't_able_to_establish_an_SMTP_connection._(#4.4.1)/)


I can,t send remote mail ?!! why ?  :roll:

10x!


i have the same problem with my isp (netvisao.pt) , work ok with "Yahoo" and "hotmail" , i also  receive well from my isp,but send via  "SMTP" conetion don´t go   :-( ??

regards
Paulo
Title: Re: can't send mail
Post by: CharlieBrady on October 24, 2005, 09:27:20 PM
Quote from: "shto"
Hi,
i have these qmail error:
Quote
1130007461.955973500 qp 2799: to=xxxx@xxx.com, uid=406, ddelay=14407.279092, xdelay=6.097462, stat=Deferred (Sorry,_I_wasn't_able_to_establish_an_SMTP_connection._(#4.4.1)/)


I can,t send remote mail ?!! why ?  :roll:

10x!


Either the remote site is not available, or your ISP is blocking port 25 outbound access. If it's the latter, then you'll need to relay your mail via your ISP's mail server. See the email panel in the server manager.
Title: Re: can't send mail
Post by: hamdta on October 29, 2005, 03:49:12 PM
Hi

Quote from: "CharlieBrady"
Quote from: "shto"
Hi,
i have these qmail error:
Quote
1130007461.955973500 qp 2799: to=xxxx@xxx.com, uid=406, ddelay=14407.279092, xdelay=6.097462, stat=Deferred (Sorry,_I_wasn't_able_to_establish_an_SMTP_connection._(#4.4.1)/)


I can,t send remote mail ?!! why ?  :roll:

10x!


Either the remote site is not available, or your ISP is blocking port 25 outbound access. If it's the latter, then you'll need to relay your mail via your ISP's mail server. See the email panel in the server manager.


i try send some test message with my mozila mail,after a configuration with username (acount)and
password,the message go well.
 So i think there is a problem on some SME qmail scripts, for made the autentication , with some ISP´s, like ( netvisao.pt),exchange massages with yahoo and hotmail is ok (ever)...

any sugestions ,is wellcomed


ps: later i foud this link:http://guias.ovh.com/EmailProblemasYSoluciones/contenu.html,with a good explanation...( Qmail el parche smtp-auth ) i try soon as i can , and put here the results.
Title: can't send mail
Post by: york on February 01, 2006, 04:24:57 AM
Hello Everyone,

Not sure if anyone is following up on this issue but I am having more or less the same issue.  I said "more or less" because my newly setup SME 6.5 can send email, but only after reboot.  All subsequent emails are just queued and not going anywhere until I reboot the SME box, then the queued emails will be delivered in a batch and then all subsequent mails are sitting duck again until the next reboot.

Anyone experienced the same issue?

By the way I configured ISP Relay via Server Manager because our ISP blocks direct SMTP outbound.  As I said SME *can* deliver emails so I know the ISP Relay works, but it works once and only once immediately after a reboot ... interesting indeed ...

Any help will be apprecaited.  Thanks.

Regards,

York
/YC:yc
Title: Outbound email solution...
Post by: zot717 on February 02, 2006, 05:27:01 PM
I had the same issue when I first started with my SME 6.5.  I was using Qwest DSL and all of my outbound email was being blocked, like it was spam.  Anyway, after a lot of research, I found a website that suggested changing your outbound mail port to another port (besides 25).  I currently have mine set to send through port 587 and haven't had any problems sending or recieving email in 8 months or so.  Hope this helps.
Title: can't send mail
Post by: CharlieBrady on February 02, 2006, 05:45:21 PM
Quote from: "york"

By the way I configured ISP Relay via Server Manager because our ISP blocks direct SMTP outbound.  As I said SME *can* deliver emails so I know the ISP Relay works, but it works once and only once immediately after a reboot ... i


If that's the case, then there is likely a bug. Please use the Bug Tracker to provide a detailed bug report.
Title: can't send mail
Post by: york on February 03, 2006, 05:53:52 AM
> email was being blocked, like it was spam

Hello zot717, I think my situation is a bit different.  I can see the mails sitting there doing nothing, but no network activities RE delivering those mails.  A quick "ps" shows qmail-remote is still there sitting around...

--

> If that's the case, then there is likely a bug. Please use the Bug Tracker to provide a detailed bug report.

Hello Charlie, since I don't kow SME enough so initially I don't want to jump right into the conclusion (i.e. this is a bug).  Nonetheless the latest development on this matter shows indeed you are correct.

After playing around with 6.5 without going anywhere, I wasted 6.5 and put 6.01 on the box, installed the rollup contribs (the so-called 6.01 PLUS), and now I can send emails via the ISP Relay option.  Sweet!!!!!

So the bottomline - a bug may be presented on 6.5 RE ISP Relay.  I will place a visit to the Bug Tracker in a moment.

And I thank everyone for your kind assistance.  Have a nice day.

Regards,

York
/YC:yc