Koozali.org: home of the SME Server
Legacy Forums => General Discussion (Legacy) => Topic started by: brit-dub on December 09, 2005, 06:27:45 PM
-
Hi
Setup as follows:
SME Server 6.0.1-01 server-gateway mode LAN nic 192.168.0.1 subnet 255.255.255.0 DHCP on / nic 2 static IP 10.0.0.2 subnet 255.255.255.0
Snort & acid (both working fine)
Dynamode (conexant) modem router IP 10.0.0.1 subnet 255.255.255.0 - dhcp off - port forwarding 80 to 10.0.0.2 I have also set DMZ to 10.0.0.2
Internet and mail is working, the local LAN is also working. I can see my web page on the local LAN http://192.168.0.1
But when I to look at my web page from the internet I get this response
ERROR
The requested URL could not be retrieved
--------------------------------------------------------------------------------
While trying to retrieve the URL: http://xx.xx.xx.xx/
The following error was encountered:
Connection Failed
The system returned:
(111) Connection refused
The remote host or network may be down. Please try the request again.
Your cache administrator is admin@xxx.co.uk.
--------------------------------------------------------------------------------
Generated Fri, 09 Dec 2005 16:54:32 GMT by server01.xxx.co.uk (Squid/2.4.STABLE6)
can anyone help me to view my web server from the internet please.
TIA
-
Try this
install the dist and afterwords i go in with mc
/etc/dhcpcd
and delete
dhcpcd-eth1.cache
dhcpcd-eth1.info
dhcpcd-eth1.info.old
dhcpcd-eth1.pid
Warning
Keep dhcpcd.exe
Maybe this work
And then i restart the computer and every things fine
I use 2 nic Server gateway mode
Jan denmark
-
thanks Janm
I went to /etc/dhcpcd
I could only find dhcpcd-eth1.info, I removed it and re-booted. but I still have the same problem.
I can see the web page on 192.168.0.1 and 10.0.0.2 but not via the web.
regards
Brit
-
hej
then try
/sbin/dhcpcd -R enter
and se if thats help in a command line
jan
you ned thaese files
dhcpcd-eth1.info
dhcpcd-eth1.pid
dhcpcd-eth1.cache
and maybe shut down your adsl modem 5 min before you try
and turn it on again ofcourse
-
Sorry I'm still new to linux what does
/sbin/dhcpcd -R enter do ? I did a google but could not find any info on -R
anyway I have tried it, I used find / -name dhcpcd-eth1.cache and did this for all the files but could not find them.
Brit
-
Try this
install the dist and afterwords i go in with mc
/etc/dhcpcd
and delete
dhcpcd-eth1.cache
dhcpcd-eth1.info
dhcpcd-eth1.info.old
dhcpcd-eth1.pid
Warning
Keep dhcpcd.exe
Maybe this work
That would only work if there is some bug in the server software which this process works around. Please report this as a bug. If you have some clues as to why the problem occurs, and why this procedure works around the problem, please add that to the bug report.
[Users shouldn't need to apply such workarounds - the software should "just work".]
Thanks.
-
Are you sure your router is doing the portforwarding correctly? What happens if you put another machine that's webserver-capable (i.e. not SME, maybe another distro on a test box) at 10.0.0.2?
-
you have a misconfigured network setup. you shouldn't need to port forward anything.
if possible, set the modem on passthrough.
then set sme to aquire isp connection either through pptp (dsl) or dhcp (cable).