Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: CKConsulting on January 13, 2006, 03:22:31 AM

Title: How to configure hpasm on DL380
Post by: CKConsulting on January 13, 2006, 03:22:31 AM

Having issues getting hpasm to slow down the fans on a Compaq DL380.

Has anyone done this before and got it to work?

Rick

Title: How to configure hpasm on DL380
Post by: barryf on January 13, 2006, 10:12:01 AM

Forgot the catch!   SME runs at runlevel 7, while hpasm assumes run level 3.  Find S??hpasm in /etc/rc3.d (?? is a number) and copy it to /etc/rc7.d.  It works fine on my ML370G2, and not too bad on the DL360, but the DLs are always noisier due to the smaller fans

Barry

Title: How to configure hpasm on DL380
Post by: CKConsulting on January 13, 2006, 04:21:43 PM

Thanks for the help Barry,
That got me one step further, but I'm still having some issues.
Fans are still running fast.

When I run a status, below is what I get.  When the server boots up hpasm starts ok?????


NOTE: New cma.conf entries were added to the top of /opt/compaq/cma.conf
==============================================================================
Starting HP Server Management Drivers and Agents, please wait ...
[root@server1 init.d]# /etc/init.d/hpasm status
hpasmd is stopped...
Status of Foundation Agents (cmafdtn): cmathreshd cmahostd cmapeerd
cmathreshd is stopped...
cmahostd is stopped...
cmapeerd is stopped...
Status of Server Agents (cmasvr): cmastdeqd cmahealthd cmaperfd
cmastdeqd is stopped...
cmahealthd is stopped...
cmaperfd is stopped...
Status of Storage Agents (cmastor): cmaeventd cmaidad cmafcad cmaided cmascsid cmasasd
cmaeventd is stopped...
cmaidad is stopped...
cmafcad is stopped...
cmaided is stopped...
cmascsid is stopped...
cmasasd is stopped...

Thanks for the help.
Rick