Koozali.org: home of the SME Server
Legacy Forums => General Discussion (Legacy) => Topic started by: irian on January 20, 2006, 11:12:19 AM
-
SME 6.0.1
2 x 200Gb Samsung IDE-Drives
I installed it with raid1.
It was in the sync process (46%) when I had to reboot the server.
After the reboot it restarts the sync from the beginning.
It does not resume at the 46% where it was before I rebooted.
It happens more often (on other servers as well) that SME resyncs the Raid after a reboot.
Can someone explain me why that is?
Is that normal?
I would like to understand what is going on.
Irian
-
irian
You must fully complete the resync process before shutting down the server or it wll start resyncing again at power up.
On sme 6
use cat /proc/mdstat
to examine the status
If the system has fully resync'd and starts resyncing after a shutdown, then that is a sign of incorrect shutdown procedure.
You should NOT turn off the power switch to shutdown a sme server.
Use the menu selections in server manager panel or do
shutdown -h now
-
the drives will sync much faster if they are optimized. check the tweaking FAQ for more info.
-
That is what I thought, Ray, but I wasn't sure.
I usually use the halt command to shotdown the server.
I will look into the optizing the drives.
It took about 15 hrs to synchronise.
Thanks for the help.
Appreciate it.
Irian