Koozali.org: home of the SME Server

Legacy Forums => Experienced User Forum => Topic started by: loejf on January 24, 2006, 04:52:52 PM

Title: RAID 1 problems with booting
Post by: loejf on January 24, 2006, 04:52:52 PM

Hi.
I have installed sme 7.0pre1 on a hardware raid-1 on an onboard raidcontroller. This works very fine.
Then I have created another hardware raid-1, on an adaptec controller.
But now, my sme will not boot. It comes to "uncompressing kernel" and then it stops forever.
If I erase the supplementary raid-1 again, sme boots again.
Please help.
Loejf.

Title: RAID 1 problems with booting
Post by: chris burnat on January 25, 2006, 10:23:22 AM

If anything doesn't work correctly, please report via the bug tracker - Use the button/links located on the left or go to http://bugs.contribs.org/enter_bug.cgi - you may need to register. Please describe exactly what you have done and exactly what you see in response.  Thank you on behalf of the Devteam, your input will be appreciated.

Title: It works now!
Post by: loejf on January 25, 2006, 11:46:56 AM

I erased the raid-1, and rebuilded it. And now it works ?

Title: RAID 1 problems with booting
Post by: chris burnat on January 25, 2006, 12:09:36 PM

"on an adaptec controller"

You possibly have an issue which could be hardware related - This is not the place to try to sort it out, and at any rate, I am not the person who can do this.  Please try to retrace your steps, and see if this problem can be repeated.  Then fill a Bug report, providing as much information as possible.. In this way, the developpers will have all information available in one central place without having to search the forum.  Thanks.