Koozali.org: home of the SME Server
Legacy Forums => General Discussion (Legacy) => Topic started by: geerd on February 08, 2006, 09:15:48 PM
-
hi everybodey,
I am "playing" with the SME7b9 as a project for my school. I dont know much about how it works but Im willing to learn.
now the question: is there a list of all the commands usable in the root and where can I find that?
greats, geerd(newby)
-
http://www.computerhope.com/unix/uls.htm
-
thanks very much!
another question: how can I download and install rpm files to my server?
I can put them on the server using winSCP. but where do I have to put them and whad comand line do I have to use to install?
greets geerd
-
You may want to use google as it will bring up many answers to your questions or quick tip if you wish to use a command and you know it's rpm then type at the prompt
man rpm
HTH
-
hi everybodey,
I am "playing" with the SME7b9 as a project for my school. I dont know much about how it works but Im willing to learn.
now the question: is there a list of all the commands usable in the root and where can I find that?
greats, geerd(newby)
Here is a good experiment for your educational experience.
First, do a little research on a utility called yum. It is a tool built into SME7 that searches for updates and installs them for you. After you learn a little about it go to your command line prompt and type the following:
yum update
It will do it's work (might take a while) and then you will be presented with "Update packages yes or no?". Pick yes and watch it install all available updates.
Then after it is done, type the following 2 commands:
signal-event post-upgrade
signal-event reboot
When you are done and the machine has re-booted PRESTO you now have SME version Pre1.
Have fun!!!
WARNING: If your bios is not configured correctly, it might take up to 15 minutes for post-upgrade to complete...BE PATIENT and don't interrupt the process. This bug is being fixed. To avoid the problem all together, make sure your bios has all floppy drives dissabled and remove your floppy drives.
-
hello again,
it took a day to install imagemagick!
first I tried to download by hand.
I failed...
then I tried to do an instalation by hand.
I failed...
then I tried Yum again. din't work. why? I wasnt in the right directory.
find the right directory and did a yum instalation again.
Succes!!!!!!!!!!!!! :-)
at least I can say this: Building my own SME-server while I dont know much about computers is hard but it's jolly good fun!!!!
greets Geerd :idea:
-
P.S. google works!!
thanks!
-
geerd
jolly good fun!!!!
So you say you made your first imagemagick howto....
So where's the beef...
Oh...that's right we forgot to tell you about the rules around here.
You fix it and it works you then post it in the Wiki.
That's the Development button to the left.
Then post a link to it back here.
Only then will you earn your at-a-boy!
BTW the other rule is you can't get everything up and running to fast.....
it makes the old folk's look bad.
We have to brush our teeth on the counter and that takes more time.
If you haven't already.... google
WinSCP
metapad
putty
I dont know much about how it works
Why do I have this feeling that was a hoax.
-
well...
i did install imagemagick becouse I needed it for gallery.
but....
gallery still didn't work so I don't know if it really works...
error when trying to uplode picture:
unable to make thumbnail
what did I do:
delete ibay
why?
i figured I could install gallery 2.
You fix it and it works you then post it in the Wiki.
could do that but I don't know if it works yet.
BTW the other rule is you can't get everything up and running to fast.....
it makes the old folk's look bad.
don't be affraid!!
for example:
the only installations I ever made on a computer are those automatic wizzards...
Iám trying this SME system because my friend recommended it and I like to learn more about this kind of software.
for now I'm just trying to make it work.
so I still dont know much about the system but I'm learning.
my next project: install gallery2