Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: Jay Rentmeester on January 10, 2002, 05:17:41 AM

Title: Update 3 for v5.0
Post by: Jay Rentmeester on January 10, 2002, 05:17:41 AM

Why does it say this in my blades panel in Server Manager?

SMEServer v5.0 Update 3 SMEServer-5.0_Update3 unsupported

Is it safe to install? I am at update level 2.

Title: Re: Update 3 for v5.0
Post by: Tim Morgan on January 10, 2002, 09:43:24 AM

I have made several unsuccessful attempts (on separate pc's) to install Update3 after successfully installing Update2 and get the message "You have not agreed to all the required licences". I marked all 13 as "yes".

TM

Title: Re: Update 3 for v5.0
Post by: Ynot on January 10, 2002, 11:30:05 AM

I have also made several unsuccessful attempts on 2 different pc's to install Update3 after successfully installing Update2.

Why does it come up with the message "You have not agreed to all the required licences"?

Ynot

Title: Re: Update 3 for v5.0
Post by: Meert on January 10, 2002, 04:09:07 PM

I had that too, but was using Lynx...
when I retried with IE 5.5, I had no problems

Title: Re: Update 3 for v5.0
Post by: Rich Lafferty on January 10, 2002, 07:35:43 PM

Update 3 is a fully supported update blade (assuming, of course, that you have a support contract!) produced by Mitel. I'll make sure the support status is correct on the blades panel momentarily.

Cheers,

Rich Lafferty
Network Server Solutions Group
Mitel Networks

Title: Re: Update 3 for v5.0
Post by: Rich Lafferty on January 10, 2002, 07:37:46 PM

In general, blades are currently uninstallable via lynx. That's this known bug:

http://www.e-smith.org/bugs/index.php3?op=showBug&bugID=58

The install should work in your favorite GUI-based browser.

Cheers,

--Rich

Title: Re: Update 3 for v5.0
Post by: Rich Lafferty on January 10, 2002, 07:46:26 PM

The blade status is now correct. In future, please report
problems like this to us directly, at bugs@e-smith.org; we can't
fix it if we don't hear about it, and bug reports will get our
attention before board posts.

Thanks,

Rich Lafferty
Network Server Solutions Group
Mitel Networks