Koozali.org: home of the SME Server
Obsolete Releases => SME 6.x Contribs => Topic started by: SchulzStefan on April 24, 2006, 09:08:08 PM
-
Using a sme 6.0.1-01. Running cups-1.1.19-8smea1 from rvandenaker, thx btw. Frontends are winxp, sp2. Here's my problem: for users printing text-files is o.k. printing large grafic-files (apx. 100 MB) the winxp-client shows an error and is not printing. I installed the printer as admin (NOT administrator). Then I installed the printer as administrator - and the file has been printed. Left all settings on the default. The printer is a HP Color LaserJet 2840. Connected to the server as http://192.168.153.101:631/printers/hp_2840 from the client. CUPS is set up as a HP JetDirect, raw queue. The adress is socket://192.168.153.130:9100. The settings in the cups.conf and in the smb.conf should all be fine - the printer works with small or only text files. The server is up to date by yum.
Anybody any idea?
Thank's in advance
-
Sometimes increasing the LogLevel of the cupsd scheduler can help you find out what's going on. You can do this with:
# mkdir -p /etc/e-smith/templates-custom/etc/cups/cupsd.conf
# cp /etc/e-smith/templates{,-custom}/etc/cups/cupsd.conf/20LogLevel
# sed -i s/info$/debug/ /etc/e-smith/templates-custom/etc/cups/cupsd.conf/20LogLevel
# signal-event cups-reconfigure
Feel free to e-mail me if you want me to have a look at the logs. My e-mail address is in the documentation for e-smith-cups.
Cheers,
Robert
-
I set the level on debug2 - I'll mail you the logs.
Thank's
Stefan