Koozali.org: home of the SME Server

Obsolete Releases => SME Server 7.x => Topic started by: fflores on May 23, 2006, 04:01:52 AM

Title: OPENVPN 7.0 Cliente-Servidor y Site-to-site
Post by: fflores on May 23, 2006, 04:01:52 AM

Ayuda.

Instale el howto de OPENVPN site to Site , cuando quiero agregar desde el //myserver/server-manager ...a 10.22.22.0 gateway 10.0.4.2 .. me envia mensaje de error dice que no existe el gateway.....  Todo el proceso me funciona, el tunel ok, ping a los tuneles ok, dev TUN0 ok, pero no logro ver a las pc de los redes locales.

Link
http://hanscees.com/sme7/openvpnsitetositetunnelsme7.html

Gracias a todos ya me funciono, si puedo ayudar escriban, tengo todo el HOWDO de Cliente-Servidor y Sito-to-Site para SME 6.0 y SME 7.x, con Openvpn

Chaos

Title: OPENVPN 7.0 Cliente-Servidor y Site-to-site
Post by: ztasevski on May 25, 2006, 03:12:55 AM

Hi,

Maybe if you put it in English you might get more help.

I think what you are after is vpn connection between two sme servers?

I have achieved exactly what you are after using IPSec encryption on SME6 but have not tried it using SME7. See this thread:

http://forums.contribs.org/index.php?topic=24038.0

Title: OPENVPN 7.0 Cliente-Servidor y Site-to-site
Post by: ldkeen on May 25, 2006, 10:59:25 AM

Maybe you missed this step:

For the route above to stick between events on the sme7 machine you will need to add the VPN address range on the other side of the tunnel as a local networks in the server-manager (https://yoursme7server/server-manager, login as admin)under the Security section. Add a local network "10.12.12.0" with gateway "10.4.0.1"

On both servers?

Respeto Lloyd

Title: OPENVPN 7.0 Cliente-Servidor y Site-to-site
Post by: CKConsulting on June 08, 2006, 03:19:42 AM

When I try to add the local with a gate way of 10.0.4.2 it errors out??

"Error: router address in not accessible from local network. Did not add network"

Rick

Title: OPENVPN 7.0 Cliente-Servidor y Site-to-site
Post by: jester on June 08, 2006, 01:40:22 PM

I had the same error (...not accessible from local network...) could'nt figure out what it was. If someone finds a solution please post it, still looking to get this working also.

jester.

Title: OPENVPN 7.0 Cliente-Servidor y Site-to-site
Post by: CKConsulting on June 08, 2006, 01:57:39 PM

You can manually add the route but I can't figure out how to get this to stay after a reboot.

Code: [Select]

route add -net 10.12.12.0 netmask 255.255.255.0 gw 10.4.0.1

Taken from http://hanscees.com/sme7/openvpnsitetositetunnelsme7.html

Rick

Title: OPENVPN 7.0 Cliente-Servidor y Site-to-site
Post by: fflores on June 09, 2006, 05:49:10 PM

Ayuda,

Alguien sabe como puedo habilitar mis NDS en mis 2 redes, para envio de email.

ejemplo.

ping mail.miserverA.com  " desde mi server B"
ping mail.miserverB.com " desde mi server A"


Gracias

Title: OPENVPN 7.0 Cliente-Servidor y Site-to-site
Post by: CKConsulting on June 09, 2006, 05:52:49 PM

Sorry, I need a little help reading that post.
Rick