Koozali.org: home of the SME Server

Obsolete Releases => SME Server 7.x => Topic started by: martin13_w on July 29, 2006, 02:29:31 PM

Title: SME 7.0 can't be installed in Poweredge 4200?
Post by: martin13_w on July 29, 2006, 02:29:31 PM

I have a old server DELL Poweredge 4200.It woks fine with SME 6.5.

but today when I want to update it to SME 7.0.The install process show me no drivers find at the first step,and then it ask me to add the driver manually.the next screen show the 4 driver:

3com 3c590/3c595/cc90x NIC
Adaptec AHA-2740/28XX/29XX
INTEL eTHER EXPRESS/100 NIC
CSI MegaRAID Controlles CMEGARAID_M BOX

find in the system,and then I press "done" butten. but after a while the installtion process stoped.It show some message like

Code: [Select]

File "/usr/bin/anaconda",line 1122,in?
instclass.setinstalldata(id)
file "/tmp/produce/installclasses/sme install class.py",line 209,in set Install ................
name error : global name dispatch is not defined.

I want to make sure,does SME 7.0 still support the devices upper? or there some way can help me to update to SME 7.0

Thanks
Martin

Title: SME 7.0 can't be installed in Poweredge 4200?
Post by: crazybob on July 29, 2006, 05:38:02 PM

Make sure you open a report in the bug tracker

Title: SME 7.0 can't be installed in Poweredge 4200?
Post by: gippsweb on July 30, 2006, 05:31:14 AM

I had one of the betas of sme7 installed on a Poweredge 4400, suprisingly I couldn't get sme6 to install beacause of driver problems.
The 4400 had a Perc raid controller which gets picked up on install.

Title: SME 7.0 can't be installed in Poweredge 4200?
Post by: cc_skavenger on July 31, 2006, 05:37:32 AM

I am having this issue as well, but with a Poweredge 2400.  The scsi raid controller is not supported in the 2.6.X kernel, but was supported in the 2.4.X kernel.  The only way to get around this is to patch the kernel.

HTH

Title: SME 7.0 can't be installed in Poweredge 4200?
Post by: martin13_w on July 31, 2006, 08:49:11 AM

Are there a supported hardware list for the SME 7.0?

Thanks
Martin

Title: SME 7.0 can't be installed in Poweredge 4200?
Post by: cc_skavenger on July 31, 2006, 02:51:08 PM

SME 7 is built on Centos 4, look at that supported hardware list.

HTH

Title: SME 7.0 can't be installed in Poweredge 4200?
Post by: jddunlap on January 13, 2007, 03:24:51 AM

Quote from: cc_skavenger

I am having this issue as well, but with a Poweredge 2400.  The scsi raid controller is not supported in the 2.6.X kernel, but was supported in the 2.4.X kernel.  The only way to get around this is to patch the kernel.

HTH

I have the same problem with a Dell PowerEdge 6450. Red Hat dropped support for PERC 2DC SCSI raid controllers past the 2.4 kernel, damn them...

Title: SME 7.0 can't be installed in Poweredge 4200?
Post by: cc_skavenger on January 14, 2007, 06:38:23 AM

I am getting around this problem by running vmware esx server on this box.  While installing SME, you can try telling SME to install the drivers for the CSI MegaRAID Controlles CMEGARAID_M BOX and see if it will recognize the controller and the hard drives afterwards.

HTH