Koozali.org: home of the SME Server
Contribs.org Forums => General Discussion => Topic started by: mgb on September 20, 2006, 12:29:10 PM
-
i open ssl to server sme 6.1**
i get login to Server console
ssh 192.168.0.1 login admin Server console
ssh 192.168.0.1 lingin root Server console
i do not get command
the server work good at i
-
@ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY!
Someone could be eavesdropping on you right now (man-in-the-middle attack)!
It is also possible that the RSA host key has just been changed.
The fingerprint for the RSA key sent by the remote host is
28:c4:6a:01:a1:1c:23:ea:a1:72:3f:f0:0b:67:08:25.
Please contact your system administrator.
Add correct host key in /root/.ssh/known_hosts to get rid of this message.
Offending key in /root/.ssh/known_hosts:1
RSA host key for 192.168.183.2 has changed and you have requested strict checking.
Host key verification failed
-
Are you connecting to SME from a linux machine using ssh?
Did you recently reinstall SME?
Are you are sure your connecting to SME? If so delete /root/.ssh/known_hosts on the machine your connecting from.
-
Are you connecting to SME from a linux machine using ssh?
Did you recently reinstall SME?
Are you are sure your connecting to SME? If so delete /root/.ssh/known_hosts on the machine your connecting from.
I GET 2 SME
I AM NOT connecting to SME IS FROM SME 2 TO SME 1
I GET LOGIN ONLY TO ADMIN
I GET LOGIN IN RO0T I GET TYPE LOGIN TO ADMIN
I DONT GET COMMAND TO SME 2 .
I INSTALL BE FOR wibmin
-
Are you connecting to SME from a linux machine using ssh?
Did you recently reinstall SME?
Are you are sure your connecting to SME? If so delete /root/.ssh/known_hosts on the machine your connecting from.
I GET 2 SME
I AM NOT connecting to SME IS FROM SME 2 TO SME 1
I GET LOGIN ONLY TO ADMIN
I GET LOGIN IN RO0T I GET TYPE LOGIN TO ADMIN
I DONT GET COMMAND TO SME 2 .
I INSTALL BE FOR wibmin
I'm a little lost.
Can you connect a keyboard and monitor to each SME and login as root and get a prompt?
-
Can you connect a keyboard and monitor to each SME and login as root and get a prompt is not login as root is login as admin
Thank you
-
Thank you
-
Can you connect a keyboard and monitor to each SME and login as root and get a prompt is not login as root is login as admin
Thank you
When you login as root you get this
(http://www.magicwilly.webhostingpal.com/ContribsForumPictures/logins/root.png)
When you login as admin you get this
(http://www.magicwilly.webhostingpal.com/ContribsForumPictures/logins/admin.png)
-
When you login as root you get this
server console
Welcome to the server console! x
x x
x Use the Arrow and Tab keys to make your selection, then press Enter. x
x x
x 1. Check status of this server x
x 2. Configure this server x
x 3. Reboot or shut down this server x
x 4. Access server manager x
x 5. View support and licensing information x
x 6. Exit from the server console x
x x
x x
x x
x x
x x
x x
x x
x x
x <Exit> <Next> x
x
--------------------------------------------------------------------------------
Thank you
-
If this is SME 6 under option 2 you can change auto login.
(http://magicwilly.webhostingpal.com/ContribsForumPictures/logins/sme6console.png)
-
If this is SME 6 under option 2 you can change auto login.
(http://magicwilly.webhostingpal.com/ContribsForumPictures/logins/sme6console.png)
hello william
i tried to do all the things u told me but it steel dont work.
i login root i get
server console
Welcome to the server console! x
x x
x Use the Arrow and Tab keys to make your selection, then press Enter. x
x x
x 1. Check status of this server x
x 2. Configure this server x
x 3. Reboot or shut down this server x
x 4. Access server manager x
x 5. View support and licensing information x
x 6. Exit from the server console x
x x
x x
x x
x x
x x
x x
x x
x x
x <Exit> <Next> x
x
--------------------------------------------------------------------------------
Thank you
-
Select item 2
Then next next next till "Select Console Mode"
Change to 'Login'
next next next till Activate Changes.
Tell me you have done the above.
-
mgb allowed me to SSH into his SME6 and I confirmed that he has 'Login' selected but a login as root still goes to the Server Console.
How can he get to a prompt to check the configuration db ?
Asked in SME6 forum as well. (http://forums.contribs.org/index.php?topic=33897.0)
-
mgb allowed me to SSH into his SME6 and I confirmed that he has 'Login' selected but a login as root still goes to the Server Console.
How can he get to a prompt to check the configuration db ?
Asked in SME6 forum as well. (http://forums.contribs.org/index.php?topic=33897.0)
Thank you
Could not connect to the database
-
mgb & william_syd
> How can he get to a prompt to check the configuration db ?
To start up in single user mode, press Ctrl X when you see the Mitel or sme logo appear on the screen after a reboot. This will start the server at a lilo text prompt.
Alternatively use a Knoppix CD or similar to boot up to & get a command prompt.
-
mgb & william_syd
Once you get the command prompt, it may be wise to run
/sbin/e-smith/signal-event post-upgrade
/sbin/e-smith/signal-event reboot
At least that will ensure any config changes inadvertantly made have been applied.
Then i fnecessary go troubleshooting
/sbin/e-smith/db configuration show |more
etc etc
-
Thanks Ray.
Cntl - X at the logo then
SMEServer-up single
This problem seems to me more than the Consolemode value in the DB.
--byte-- got me curious so I setup a test SME6 set to auto login to the server console.
At the local console, it did that no questions asked. When I ssh'd, I got a login prompt and I could login as root and stay in a shell.
With mgb, I ssh'd over the 'net and loged in as root. There was a brief flash of text and then it went into the server-console.
I'm thinking that the root shell has been changed to /sbin/e-smith/console or that command is running as soon as you log in.
-
mgb, try this
At computer
Reboot
At yellow/blue splash screen press Control X
type SMEServer-up single
type chsh -s /bin/bash
type chsh -s /sbin/e-smith/console admin
type init 7 or reboot
-
mgb, try this
At computer
Reboot
At yellow/blue splash screen press Control X
type SMEServer-up single
type chsh -s /bin/bash
type chsh -s /sbin/e-smith/console admin
type init 7 or reboot
HELLO William ,
ןI want to thank you for all the technical support you have given me. I am heopeful that I will gain better understanding of the material in the near future
however, presently I am still baffled. I pressed Control C and got a Boot: and I am not sure what I need to write now. If I enter, it comes up regular. If I press Lilo, it doesn't recognize and then I press Tab to see what I can press. Now what? I think that I will reboot the CD and try it again on the server. If you have somnething else I need to do before \hand, I will be very happy to get that information ASAP. You also asked me what caused this problem and I although I tried to install Clumsquid, it didn't work and the service stopped working. This was written by Karen the English teacher, Karen. How is it in Australia? Looking forward to hearing from you soon. Bye, Yossi
-
Let me do this with some pictures...
At the splash screen
(http://www.magicwilly.webhostingpal.com/ContribsForumPictures/logins/splash.png)
Press Control x and you get
(http://www.magicwilly.webhostingpal.com/ContribsForumPictures/logins/Control_x.png)
Type SMEServer-up single
(http://www.magicwilly.webhostingpal.com/ContribsForumPictures/logins/smeserver-up_single.png)
Press enter and you get..
(http://www.magicwilly.webhostingpal.com/ContribsForumPictures/logins/singleprompt.png)
Now type chsh -s /bin/bash
(http://www.magicwilly.webhostingpal.com/ContribsForumPictures/logins/chsh_root.png)
Press enter and you get..
(http://www.magicwilly.webhostingpal.com/ContribsForumPictures/logins/resultrootchange.png)
And for admin...
(http://www.magicwilly.webhostingpal.com/ContribsForumPictures/logins/resultadminchange.png)
And then reboot..
(http://www.magicwilly.webhostingpal.com/ContribsForumPictures/logins/reboot.png)
-
mgb, try this
At computer
Reboot
At yellow/blue splash screen press Control X
type SMEServer-up single
type chsh -s /bin/bash
type chsh -s /sbin/e-smith/console admin
type init 7 or reboot
HELLO William ,
ןI want to thank you for all the technical support you have given me. I am heopeful that I will gain better understanding of the material in the near future
however, presently I am still baffled. I pressed Control x and got a Boot: and I am not sure what I need to write now. If I enter, it comes up regular. If I press Lilo, it doesn't recognize and then I press Tab to see what I can press. Now what? I think that I will reboot the CD and try it again on the server. If you have somnething else I need to do before \hand, I will be very happy to get that information ASAP. You also asked me what caused this problem and I although I tried to install Clumsquid, it didn't work and the service stopped working. This was written by Karen the English teacher, Karen. How is it in Australia? Looking forward to hearing from you soon. Bye, Yossi
the ctrl L
type chsh -s /bin/bash
IS OK
SHELL CHANGED
TYPE chsh -s /sbin/e-smith/console admin
SHELL NOT CHANGED
-
Thats ok if admin shell don't change. I made an error in my picture thats why it changed for me. (EDIT: I changed my picture.)
-
This was written by Karen the English teacher, Karen. How is it in Australia? Looking forward to hearing from you soon. Bye, Yossi
Hello Karen and Yossi,
Australia is good. Nearly summer so no more cold in Sydney.
-
This was written by Karen the English teacher, Karen. How is it in Australia? Looking forward to hearing from you soon. Bye, Yossi
Hello Karen and Yossi,
Australia is good. Nearly summer so no more cold in Sydney.
OK
type chsh -s /bin/bash admin
ok
type chsh -s /sbin/e-smith/console admin
ok
-
Thats ok if admin shell don't change. I made an error in my picture thats why it changed for me. (EDIT: I changed my picture.)
is ok i get command
-
Thats ok if admin shell don't change. I made an error in my picture thats why it changed for me. (EDIT: I changed my picture.)
is ok i get command
Now you can ssh.
i open ssl to server sme 6.1**
i get login to Server console
ssh 192.168.0.1 login admin Server console
ssh 192.168.0.1 lingin root Server console
i do not get command
the server work good at i
and 'su admin' to get to the server console when logged in as root.
-
to get virus in the network
http://www.jackal-net.at/tiki-read_article.php?articleId=1
-
to get virus in the network
http://www.jackal-net.at/tiki-read_article.php?articleId=1
You have a totally new subject so you should start a new thread.
I don't use SME6 anymore. Try here (http://sme.swerts-knudsen.dk/index.html?frame=http%3A//sme.swerts-knudsen.dk/howtos/howto_22.htm) for a anti virus howto.
-
mgb allowed me to SSH into his SME6 and I confirmed that he has 'Login' selected but a login as root still goes to the Server Console.
If that is the case, then he or someone else has modified that system.