Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: Rick on February 09, 2002, 03:43:57 PM

Title: Hylafax on SME 5.X how to
Post by: Rick on February 09, 2002, 03:43:57 PM

I wrote a little HOW-TO on installing Hylafax on a SME 5.X server. It's a little different from installing the same thing on a 4.X server. It can be found here:

http://www.sulman.org/sme/hylafax.html

Title: Re: Hylafax on SME 5.X how to
Post by: Ed Form on February 09, 2002, 05:19:13 PM

Rick wrote:
>
> I wrote a little HOW-TO on installing Hylafax on a SME 5.X
> server.

The first rpm in the list in your HOW-TO, Omni-0.5.0-4.i386.rpm, is non-existent, or at least rpmfind doesn't know of its existence.

Ed Form

Title: Re: Hylafax on SME 5.X how to
Post by: Rick on February 09, 2002, 06:10:20 PM

http://www.rpmfind.net//linux/RPM/redhat/updates/7.2/i386/Omni-0.5.0-4.i386.html

Title: Re: Hylafax on SME 5.X how to
Post by: Ed Form on February 09, 2002, 10:57:44 PM

Hi Rick,

I should have been more careful and told you the actual problem. I know that the rpms exist because I downloaded them all using Google to find them. My real point was that your HOW-TO is bust.

1. The link to rpmfind actually calls...

                http://www.sulman.org/sme/www.rpmfind.net

If I edit the www.sulman.org/sme/ bit off the front of that incorrect address, rpmfind comes up ok, but when I cut and paste the names of the rpms from your HOW-TO into the search box of the rpmfind page, none of them are found. Cut and paste the same names into Google and I can find every one of them.

Ed Form

Title: Re: Hylafax on SME 5.X how to
Post by: Rick on February 09, 2002, 11:30:27 PM

Ed,

I corrected the wrong links. Thanks for the attention. As far as the RPMFIND search is concerned: I don't know why this search does not work. All the RPM's mentioned in the HOWTO are on their site.

Title: Re: Hylafax on SME 5.X how to
Post by: guestHH on February 10, 2002, 01:48:33 AM

Hi Rick,

Thanks for the updated how-to. I have some questions though:

1. Why do you use the beta version of hylafax 4.1?
2. Why do you use --nodeps to install the packages ?
3. Why don't you use faxgetty (send and recieve faxes)
4. Why don't you add the links so Hylafax starts up at boot-time?

I think your effort is good, but i also think that from a evarage user point of view your how-to is somehow incomplete. Maybe you can discuss this wit the original auther of the how-to? so a complete 'now-worries' How-To can be achieved?

Anyway good job, and please improve it for the 'average user'.

Regards,
guestHH

Title: Re: Hylafax on SME 5.X how to
Post by: Ed Form on February 10, 2002, 04:40:19 AM

guestHH wrote:
>
> Hi Rick,
>
> Thanks for the updated how-to. I have some questions though:
>
> 1. Why do you use the beta version of hylafax 4.1?

And do we really need that big Japanese font rpm?

Ed Form

Title: Re: Hylafax on SME 5.X how to
Post by: Rick on February 10, 2002, 11:29:09 AM

Hi guys,

Thanks for the feedback so far.

> 1. Why do you use the beta version of hylafax 4.1?

I corrected this. I did not realize there was a new version.

> 2. Why do you use --nodeps to install the packages ?

Corrected this.

> 3. Why don't you use faxgetty (send and recieve faxes)

I am going to look into that later this week.

> 4. Why don't you add the links so Hylafax starts up at boot-time?

See above ;-)

> And do we really need that big Japanese font rpm?

Not sure about that. I think it's a dependency for ghostscript.

Title: Re: Hylafax on SME 5.X how to
Post by: guestHH on February 10, 2002, 05:41:16 PM

Hi Rick,

All clear looking forward to the updated version. If you have any questions maybe i can help on please let me know.

Regards,
guestHH

Title: Re: Hylafax on SME 5.X how to
Post by: Les Mikesell on February 11, 2002, 04:08:26 AM

>> 3. Why don't you use faxgetty (send and recieve faxes)

>I am going to look into that later this week.

And when that works, just to make things more difficult, can you configure faxgetty to invoke mgetty on data calls and mgetty to run pppd for ppp connections?  This will permit the same modem to accept inbound fax, login, and dial-up networking calls.

Title: Re: Hylafax on SME 5.X how to
Post by: guestHH on February 11, 2002, 10:13:09 PM

Hi Les,

That is an 'user-specific' option that will follow in the section 'Options' Rick's How-To   ;-)

(or is it a real question..?)

Reagrds,
guestHH

Title: Re: Hylafax on SME 5.X how to
Post by: Jeroen on February 12, 2002, 03:42:33 AM

I see you use a source rpm (hylafax-4.1-1rh7.src.rpm)...don't think it will work?