Koozali.org: home of the SME Server
Obsolete Releases => SME Server 7.x => Topic started by: pelli on November 27, 2006, 03:10:33 PM
-
i have a server with pci isdn. I have set office rule medium, outside and weekend short. In the log file i see that every hour the server make a connection. the db configuration is:
AccessType=dialup
ActiveAccounts=4
ConsoleMode=login
ContactEmail=
ContactName=
ContactOrg=
DialupConnOffice=medium
DialupConnOutside=short
DialupConnWeekend=short
DialupFreqOffice=every15min
DialupFreqOutside=everyhour
DialupFreqWeekend=everyhour
DialupModemDevice=/dev/ttyI0
Is possible set the dialup ONLY when there is one demanded from a computer client?
any suggetion?
thanks
-
Hi pelli,
is it possible you are using ntp??
You could try disabling it in the Server-Manager.
Good luck
-
hi,
thanks for the answer. I have disabled the ntp service but the server, every hour, dial up the connection. If i set DialupFreqOutside and DialupFreqWeekend a never is correct?
Thanks
-
i have a server with pci isdn.
Well, it's good to know that ISDN is working. There were some bug reports that I tried to fix, but didn't receieve any feedback.
-
thanks for the answer. I have disabled the ntp service but the server, every hour, dial up the connection. If i set DialupFreqOutside and DialupFreqWeekend a never is correct?
If you have configured "never" and it is dialling up, then that is a bug, so please report the problem in the Bug Tracker.
-
no, i haven't configure the frequency at never... is only a question...
.
-
no, i haven't configure the frequency at never... is only a question...
So, you have it configured for "every hour", and now you complain that it dials up "every hour"?
-
eheheh, yes :D . I would like that it dialup only when the xp client demand a connection. I don't have a flat for isdn and a call every hour ---> €€€€
i can use other configuration? (ex. every6hour )
-
i have a server with pci isdn.
Well, it's good to know that ISDN is working. There were some bug reports that I tried to fix, but didn't receieve any feedback.
I had a problem with udev for make the device (isdninfo, etc.) I resolved with manual make of device