Koozali.org: home of the SME Server

Obsolete Releases => SME Server 7.x => Topic started by: Sijhtam on December 28, 2006, 10:39:14 PM

Title: How to install my ivm match ups?
Post by: Sijhtam on December 28, 2006, 10:39:14 PM

Hi everyone,

I have tryed to install my ups (a imv match 700) but i cant get it to work? When i install the e-smith-powstatd-0.1.0.rpm i cant get the correct settings?

Have some one did the job on a ivm match 700?

Mathijs

Title: How to install my ivm match ups?
Post by: byte on December 28, 2006, 11:48:02 PM

Moving this topic to the SME Server 7.x forum, it is more appropriate there. Thanks

Title: Re: How to install my ivm match ups?
Post by: byte on December 28, 2006, 11:53:08 PM

Quote from: "Sijhtam"

I have tryed to install my ups (a imv match 700) but i cant get it to work?

Check this list to see if your UPS is compatible...

http://www.networkupstools.org/compat/stable.html

If so then you can use the built in NUT ups tools which is already on the SME Server and theres a wealth of info on these forums on how to configure.

Quote

When i install the e-smith-powstatd-0.1.0.rpm i cant get the correct settings?

This rpm is well out of date I would remove this as its not needed we use NUT which is already built in to the SME Server

Title: How to install my ivm match ups?
Post by: Sijhtam on December 30, 2006, 12:19:51 PM

Thanx for you help.
I removed the powstatd rpm. and used NUT to get the ups working. using the help from topic  http://forums.contribs.org/index.php?topic=33852.0.

And used my own UPS model. Now when i try to connect it says:  Error: Driver not connected
So i think the driver is not accepted.
have to find out witch driver i have toe use for my imv match 500 nowdays called by the name Victron.

Mathijs