Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: Richard on March 04, 2002, 12:58:50 AM

Title: Windows file access in 5.1.2
Post by: Richard on March 04, 2002, 12:58:50 AM

Hello,

Previously I used SME 5.0, with succes. some weeks ago I upgraded to a beta 4 of 5.1.2. Sinds then i had problems accessing the the server i-bays. I'm not a linux expert, but i tried to solve this. I screwed up the server. Now i installed the final of 5.1.2 from scratch. But the problem became worse.

on the beta I could access the server using a login/password, but now the server rejects me directly without asking a login. Internet access, SSH, and FTP works fine. The Clients configurarion isn't altered at all.

I wan't the users to acces the files directory (read/write) without the need to give a username and/or password.

Configuration:

Server: SME 5.1.2. server and gateway
Clients: windows 95 through XP
Workgroup matches those of the network, it pops up in the network list.
DHCP: disabled
workgroup and domain controller: disabled.
roaming profiles: disabled.

I-bay setup:
group: everyone
user acc.: write: group: read: everyone
public ftp: Local network (no pass...)
CGI, PHP...: disabled.

Title: Re: Windows file access in 5.1.2
Post by: Rob Wellesley on March 21, 2002, 10:53:52 AM

Richard wrote:
>
> Hello,
>
> Previously I used SME 5.0, with succes. some weeks ago I
> upgraded to a beta 4 of 5.1.2. Sinds then i had problems
> accessing the the server i-bays. I'm not a linux expert, but
> i tried to solve this. I screwed up the server. Now i
> installed the final of 5.1.2 from scratch. But the problem
> became worse.
>
> on the beta I could access the server using a login/password,
> but now the server rejects me directly without asking a
> login.


in 5.1.2 microsoft networking login MUST be the same as user accounts/passwords on the server. No users no access. You will have to go back to 5.0 if you dn't want user accounts. It must be a "feature" of the move to samba 2.4.
 
Rob

Title: Re: Windows file access in 5.1.2
Post by: Rob Wellesley on March 21, 2002, 10:59:27 AM

better yet

http://forums.contribs.org/index.php?topic=3566.msg12130#msg12130

Title: Re: Windows file access in 5.1.2
Post by: Richard on March 21, 2002, 05:12:43 PM

Hello,

I solved the problem. Now every windows client on the lan can use the ibays without the need to login.

i changed the /etc/samba/smb.conf file.

make sure the following settings are set correctly:

Guest ok = yes
security = share

reboot the server and clients.

 Maybe someone can build a how-to to change this settings trough the templates.

   Regards,
       Richard Dols

.

Title: Re: Windows file access in 5.1.2
Post by: Rob Wellesley on April 03, 2002, 09:28:24 AM

>
> i changed the /etc/samba/smb.conf file.
>
> make sure the following settings are set correctly:
>
> Guest ok = yes
> security = share
>

Exellent!  -  However you should do it the e-smith way by creating a fragment in /etc/e-smith/custom-templates or your change will be overwritten next time you update something that requires a rewrite of smb.conf - like the creation of an i-bay