Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: Lowell on March 06, 2002, 12:46:15 PM

Title: Raid 1 install problem
Post by: Lowell on March 06, 2002, 12:46:15 PM

I reinstalled 5.1.2 after installing a second identical 15 gig drive, and something isn't right.  When I do a "DF" from root, it shows I only have one drive and its slightly over 7 gig.  I have both drives as master, one on primary, the other on secondary, and the cdrom is slave on secondary.   Something I should have done differently?  I have set up Raid on a 4.1.2 box before with no problems.  What could be this little stinker?

Low

Title: Re: Raid 1 install problem-followup
Post by: Lowell on March 10, 2002, 06:46:33 PM

Install failed - this is ALL new equipment not older bios problems.  Thanks for the couple of emails representing different opinions on what the minor problem could be.  What I found was either the software raid works, or it doesn't.  I have exactly the same setup running on an e-smith 4.1.2 system and it works perfectly.  What was changed in SME 5?  If it wasn't for the security issues, I wouuld take this back to 4.1.2.