Koozali.org: home of the SME Server

Obsolete Releases => SME Server 7.x => Topic started by: fitzrik on April 27, 2007, 12:22:52 PM

Title: Upgrade to 7.1 broke raid
Post by: fitzrik on April 27, 2007, 12:22:52 PM

Hi there,

I have an smeserver. It was running 7.0 beta 9.

There was a network problem so I thought I wuld update to latest version 7.1.

Install seemed to go ok but on reboot I get a kernel panic. Before that I get RAID errors.

no devices found for /dev/md1

no devices found for /dev/md2

If I use the disc to boot into rescue mode, it seems to auto generate the raid and I can see my files.

My mdadm.conf is quite minimal

device partitions
mailaddr root
array /dev/md2 super-minor=2
array /dev/md1 super-minor=1

I don't want to rebuild server yet. If the CD can see the raid it must be recoverable.

Thanks for help in advance.

Richard

Title: Upgrade to 7.1 broke raid
Post by: fitzrik on April 27, 2007, 02:51:20 PM

I modified fstab to see if I could boot the drive as a normal ext3 drive

Now even in rescue mode it cannot mount /dev/md1
It can mount /dev/md0 which is the boot partition

So I cannot re-modify fstab
If I try to mount /dev/md1 it tells me
failed : device or resource busy

Title: Upgrade to 7.1 broke raid
Post by: Stefano on April 27, 2007, 03:30:00 PM

Quote from: "fitzrik"

I modified fstab to see if I could boot the drive as a normal ext3 drive

Now even in rescue mode it cannot mount /dev/md1
It can mount /dev/md0 which is the boot partition

So I cannot re-modify fstab
If I try to mount /dev/md1 it tells me
failed : device or resource busy

Hi..

try starting with a knoppix cd/dvd and edit fstab again..

HTH
ciao

Stefano

Title: Upgrade to 7.1 broke raid
Post by: fitzrik on April 27, 2007, 04:34:02 PM

The problem is that i can't mount that partition under any system.

I'm currently running trinity rescue and using photorec to get fiels off. I think the partition is gone for good :(