Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: Ille DuPre on March 10, 2002, 04:56:01 PM

Title: PHP Update - Blade Failure - Manual update failure
Post by: Ille DuPre on March 10, 2002, 04:56:01 PM

I went to :

ftp://ftp.e-smith.org/pub/e-smith/updates/5.1.2/Update1

Copied the RPMS to tmp folder on my server

I have tried installing these RPMS manually...I get the following error:

error: failed dependencies:
libmn.so.11 is needed by php-4.0.6-7es4
php = 4.0.4pl1-9 is needed by php-manual-4.0.4pli-9

I am running SME v5 and the error happens when I run the following command:

rpm -Uvh *.rpm

All 8 RPMS have been copied to my tmp directory.

Any help with this is appreciated.

Title: Re: PHP Update - Blade Failure - Manual update failure
Post by: mike on March 10, 2002, 07:22:43 PM

>I am running SME v5 and the error happens when I run the following command:

>rpm -Uvh *.rpm

v5.?   is it 5.0 or 5.1.1 or 5.1.2, because each has a little different process for the patch. there are some dependancies that have to be matched for the patch to install correctly.

hope this helps,
mike

Title: Re: PHP Update - Blade Failure - Manual update failure
Post by: Wietse on March 10, 2002, 08:09:42 PM

Look for your dependencies at rpmfind.net...
Helps me lot of times if I update (or install) those first! But you have be carefull: I update an of the dependecies once, and it resulted in a unusable system and I needed to reinstall completely!

Title: Re: PHP Update - Blade Failure - Manual update failure
Post by: jehu on March 10, 2002, 08:56:44 PM

I copied all 8 files to a new folder I created in the admin home directory. These were the only files there.
Then did rpm -Uvh *.rpm and it worked.  I did it from win2000 box and then opened
my home folder on the e-smith box and paste it there. I then went back to my e-smith box and ran rpm -Uvh *.rpm. It worked for me.
Good Luck,
Jehu.

Title: Re: PHP Update - Blade Failure - Manual update failure
Post by: Ille DuPre on March 11, 2002, 04:34:04 AM

I am using V5.0

Title: Re: PHP Update - Blade Failure - Manual update failure
Post by: Steve Bush on March 11, 2002, 04:52:50 AM

I had the same issue.
Uninstall php-manual before applying the update.

See the devinfo thread:
http://www.mail-archive.com/devinfo%40lists.e-smith.org/msg08459.html