Koozali.org: home of the SME Server

Obsolete Releases => SME 7.x Contribs => Topic started by: mgb on May 31, 2007, 06:16:36 PM

Title: i need to configure the NIC
Post by: mgb on May 31, 2007, 06:16:36 PM
login admin
l dont get NIC Bonding Options
help help
Title: i need to configure the NIC
Post by: bpivk on May 31, 2007, 06:23:15 PM
Do you have your server in a proper mode?
AFAIK bonding works on server only setup.
Title: is work not in my server 7.13
Post by: mgb on May 31, 2007, 07:14:05 PM
http://forums.contribs.org/index.php?topic=35440.0

http://forums.contribs.org/index.php?topic=36877.0



Do you have your server in a proper mode?  ????
Title: i need to configure the NIC
Post by: bpivk on May 31, 2007, 07:48:38 PM
I read some posts about nic bonding and here you are.
http://forums.contribs.org/index.php?topic=31307.0

As i said (if i didn't mess something up which could be an option) nic bonding can be enabled if you use two identical nics in server only mode.
Note that this was the case in SME7rc1 and i don't know if it still exists.

Quote
Do you have your server in a proper mode? ????

I was asking if you set your server in server only or server/gateway mode because you had the option if you vere using server in server only mode.
Title: thanks for answer my server is proper mode
Post by: mgb on June 01, 2007, 09:37:20 AM
l install it manual
is work but not good unouf
l check
my test was like
ping myserver
mii-tool
eth0: negotiated 100baseTx-FD, link ok
eth1: negotiated 100baseTx-FD, link ok

ifconfig|more
bond0     Link encap:Ethernet  HWaddr 00:01:02:1D:B5:D3
          inet addr:192.168.183.4  Bcast:192.168.183.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MASTER MULTICAST  MTU:1500  Metric:1
          RX packets:119491 errors:0 dropped:0 overruns:0 frame:0
          TX packets:48570 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:66258306 (63.1 MiB)  TX bytes:7653597 (7.2 MiB)

eth0      Link encap:Ethernet  HWaddr 00:01:02:1D:B5:D3
          UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
          RX packets:119013 errors:0 dropped:0 overruns:0 frame:0
          TX packets:48437 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:66204035 (63.1 MiB)  TX bytes:7641877 (7.2 MiB)
          Interrupt:201 Base address:0xbc00

eth1      Link encap:Ethernet  HWaddr 00:01:02:1D:B5:D3
          UP BROADCAST RUNNING SLAVE MULTICAST  MTU:1500  Metric:1
          RX packets:478 errors:0 dropped:0 overruns:0 frame:0
          TX packets:133 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:54271 (52.9 KiB)  TX bytes:11720 (11.4 KiB)
          Interrupt:193 Base address:0xb800

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:14661 errors:0 dropped:0 overruns:0 frame:0
          TX packets:14661 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4070347 (3.8 MiB)  TX bytes:4070347 (3.8 MiB)

[root@total5 ~]#
ping total5
Reply from 192.168.183.4: bytes=32 time<1ms TTL=64

l disconect 1 eth0 the
result
Ping request timed out.
Please check the name and try again.
after 10 second
it begin
good


Reply from 192.168.183.4: bytes=32 time<1ms TTL=64

i am nearly 2 weeks with the problem