Koozali.org: home of the SME Server

Obsolete Releases => SME VoIP (Asterisk, SAIL etc) => Topic started by: versa on June 06, 2007, 09:16:20 AM

Title: SAIL and the CDR
Post by: versa on June 06, 2007, 09:16:20 AM

Hi Guys, I have installed the latest versons of sail (2.1.15-468) and asterisk ( 1.4.1-7)but the DCR panel still shows no records, there are records in the log files, am I missing something ?
This is on a clean install of sme 7.1.3 the only thing I did at the time was install the uk sounds rpm.

I also seem to have an echo problem both on a softphone and also on a Linksys PAP2 with a standard handset. This is not noticable on extension to extension but on outgoing calls using both voipbuster and voipstunt, anyone see something similar?

Regards...

Title: SAIL and the CDR
Post by: SARK devs on June 06, 2007, 09:48:22 AM

Hi,

Re CDR

Check that you have "log CDR to MySQL" turned ON in Globals.

Re Echo,

We have no reported echo on 1.4, either on SIP or TDM channels.  It has been running live on our office switch (over Gamma and ISDN BRI) for over a month now without problems. However, we have no experience of using softphones or ATA's (other than Channel banks).  All of our testing is done with SNOM, Aastra and Cisco/Linksys  SIP handsets.  We've no experience with VoipStunt or Voipbuster either I'm afaraid, although a quick look at the two websites would suggest that they are one and the same carrier.  Have you run echo free with this carrier with an earlier release of Asterisk?

Kind Regards

Selintra

Title: SAIL and the CDR
Post by: llandry on June 07, 2007, 05:49:56 PM

Versa,

I had to add the cdr mysql library to get it working...

Check this thread for a message from dbiczo

http://forums.contribs.org/index.php?topic=36244.0

hope this helps.

L2

Title: SAIL and the CDR
Post by: versa on June 08, 2007, 12:26:01 AM

Hi selintra & llandry
Yes setting the sql option sorted it thanks.
I have yet to try a different provider to see about the echo bit

Thanks again  :D

Excelent work