Koozali.org: home of the SME Server

Obsolete Releases => SME Server 7.x => Topic started by: milaweb on July 19, 2007, 09:09:04 AM

Title: Howto mount an USB harddrive to an Ibay (works after boot)
Post by: milaweb on July 19, 2007, 09:09:04 AM

Hi

I mount an USB Harddisk with this command

Code: [Select]

#mount /dev/sda1 /home/e-smith/files/ibays/filserver/files
and that works very good, but how do i set this up in eg fstab, so that it will work after reboot?
I have searched the forum, and i have tried this:

Code: [Select]

/dev/sda1               /home/e-smith/files/ibays/filserver/files auto auto,defaults 0 0


What am i doing wrong here?

Title: Howto mount an USB harddrive to an Ibay (works after boot)
Post by: mmccarn on July 19, 2007, 11:14:53 AM

I have added 'mount /dev/sda1' to /etc/rc.d/rc.local, and my drive seems to remount whenever I reboot.

[edit]
after labelling my external disk and editing fstab to say LABEL=blah in the device column, I had to change /etc/rc.d/rc.local to say mount LABEL=blah instead of 'mount /dev/sda1'
[/edit]

I *think* I saw a note once that fstab is processed before the usb subsystem is active (?)

Title: Re: Howto mount an USB harddrive to an Ibay (works after boot)
Post by: SoftDux on September 07, 2007, 10:15:21 AM

Using the LABEL option is a much safer way of doing this. The reason being, that if you had 2 / 3 USB drives, it could change the devices, so by using LABEL, it will always mount the same HDD in the same place :)