Koozali.org: home of the SME Server

Obsolete Releases => SME Server 7.x => Topic started by: SuperFly on July 31, 2007, 06:41:08 PM

Title: Grub issue after updating to 7.2
Post by: SuperFly on July 31, 2007, 06:41:08 PM

Hi all

I just did an update from 7.1.3 to 7.2 by CD and did test the image before performing the upgrade.

After setup said it had completed successfully I had to reboot only to be met by a screen saying the following

Minimal BASH-like editing is supported. For the first word, TAB lists possible command completions....


Does anybody have any idea how to fix this?

Title: Grub issue after updating to 7.2
Post by: SuperFly on July 31, 2007, 08:08:54 PM

Right, managed to get the system to boot by typing the following commands at the bash prompt

root (hd0,0)
kernel /vmlinuz-2.6.9-55.0.2.EL ro root=/dev/main/root
initrd /initrd-2.6.9-55.0.2.EL.img
boot

 :D

My grub.conf looks like this

default=1
timeout=5
splashimage=(hd0,0)/grub/smeserver.xpm.gz
foreground 000000
background 4E95D3
hiddenmenu
title SME Server (2.6.9-55.0.2.ELsmp)
        root (hd0,0)
        kernel /vmlinuz-2.6.9-55.0.2.ELsmp ro root=/dev/main/root
        initrd /initrd-2.6.9-55.0.2.ELsmp.img
title SME Server-up (2.6.9-55.0.2.EL)
        root (hd0,0)
        kernel /vmlinuz-2.6.9-55.0.2.EL ro root=/dev/main/root
        initrd /initrd-2.6.9-55.0.2.EL.img

The system is up and running...always a good thing but have I started it correctly? Should I rather be using the smp option?

Now, how do I get the system to boot correctly so that it doesn't display the grub screen I mentioned above?

Also, I noticed that on 7.1.3 it doesnt have the below two lines. Should they be there?

foreground 000000
background 4E95D3

Title: Grub issue after updating to 7.2
Post by: william_syd on August 01, 2007, 05:35:38 AM

My stock 7.2

Code: [Select]

[root@sme72so-vm ~]# cat /boot/grub/grub.conf
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE:  You have a /boot partition.  This means that
#          all kernel and initrd paths are relative to /boot/, eg.
#          root (hd0,0)
#          kernel /vmlinuz-version ro root=/dev/main/root
#          initrd /initrd-version.img
#boot=/dev/hda
default=0
timeout=5
splashimage=(hd0,0)/grub/smeserver.xpm.gz
foreground 000000
background 4E95D3
hiddenmenu
title SME Server (2.6.9-55.0.2.ELsmp)
        root (hd0,0)
        kernel /vmlinuz-2.6.9-55.0.2.ELsmp ro root=/dev/main/root
        initrd /initrd-2.6.9-55.0.2.ELsmp.img
title SME Server-up (2.6.9-55.0.2.EL)
        root (hd0,0)
        kernel /vmlinuz-2.6.9-55.0.2.EL ro root=/dev/main/root
        initrd /initrd-2.6.9-55.0.2.EL.img
[root@sme72so-vm ~]#


In this case, Default=0 is smp and Default=1 is up.

Title: Grub issue after updating to 7.2
Post by: SuperFly on August 01, 2007, 10:08:26 AM

Okay, so from looking at your conf the grub.conf seems to be okay. Should I reinstall grub using the following command?

grub> setup (hd0)

Title: Grub issue after updating to 7.2
Post by: william_syd on August 01, 2007, 10:51:01 AM

I don't know.

It should just work.

Take it to the bug tracker.

Title: Grub issue after updating to 7.2
Post by: SuperFly on August 01, 2007, 10:54:40 AM

The devs are busy guys so I'm going to try reinstalling grub before going to the bug tracker. I'll let you know the outcome.

Title: Grub issue after updating to 7.2
Post by: SuperFly on August 03, 2007, 06:22:16 PM

Okay, it is fixed and I didnt even do anything. All I did is remove my second HHD and replaced it with another drive, recreated the mirror (so I could mess around without "breaking" something). I removed my main HDD and booted up off the second drive...and it booted up without any probs. So, now I'll wipe my previous mirror and recreate it...hopefully all should go well.

Title: Re: Grub issue after updating to 7.2
Post by: dpmiller on November 27, 2007, 04:04:39 AM

I'm bug hunting because I had the same problem

CD Upgrade 7.2 on a 7.13 system with mirrored (software) SATA disks and 2 disk arrays.