Koozali.org: home of the SME Server

Obsolete Releases => SME Server 7.x => Topic started by: manegar on September 25, 2007, 08:47:53 AM

Title: SME 7.1 & HP ProLiant BL460c Server Blade
Post by: manegar on September 25, 2007, 08:47:53 AM

Hi,
       I would like to install SME 7.1 on HP ProLiant BL460c Server Blade which has an onboard HP Smart Array E200i RAID controller, please give me some information about the compatibility of the above said RAID controller.

With Regards,

Avinash

Title: Re: SME 7.1 & HP ProLiant BL460c Server Blade
Post by: byte on September 25, 2007, 10:21:18 AM

Quote from: manegar on September 25, 2007, 08:47:53 AM

I would like to install SME 7.1 on HP ProLiant BL460c Server Blade which has an onboard HP Smart Array E200i RAID controller, please give me some information about the compatibility of the above said RAID controller.

Use our latest 7.2 version and check the Centos/Redhat compatibility list to see if your h/w is supported.

Title: Re: SME 7.1 & HP ProLiant BL460c Server Blade
Post by: manegar on September 25, 2007, 10:25:04 AM

Thanks for the reply, it will be very helpful if you can provide the link to check the Hardware compatibility list for CentOS/RedHat.

Thanks & Regards,

Avinash

Title: Re: SME 7.1 & HP ProLiant BL460c Server Blade
Post by: skydivers on September 25, 2007, 11:28:29 AM

Quote from: manegar on September 25, 2007, 10:25:04 AM

Thanks for the reply, it will be very helpful if you can provide the link to check the Hardware compatibility list for CentOS/RedHat.

Thanks & Regards,

Avinash

https://hardware.redhat.com/

Google is your friend!

Title: Re: SME 7.1 & HP ProLiant BL460c Server Blade
Post by: manegar on September 25, 2007, 11:47:31 AM

Thanks, I installed SME 7.1 on a test server (HP Proliant ML 350 G5 series, which is live with 2 domains and 100 users) which has E200i RAID controller and it is working fine now. I hope it doesn't give any problem while installing it on production server. 

I would like to continue for some more days with ML 350 server (as it is live) and after testing the Blade server I would like to migrate my existing SME 7.1 from the test server to 7.2 on the production server i.e., Blade Server, can anyone please help me with the procedure for migrating it to another server with all the configuration existing of the ML 350.  Is there any restrictions like the other server should have the same hardware, network configuration etc..  as the present??

Avi