Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: Liam on March 31, 2002, 09:47:17 PM

Title: NTP Servers
Post by: Liam on March 31, 2002, 09:47:17 PM

I  would like to sync my SME Server with a NTP Server for the time but i can't find one that will work on a server only windows so if you know of one please let me know.

Title: Re: NTP Servers
Post by: Dan Brown on March 31, 2002, 09:52:12 PM

RTFM. http://www.e-smith.org/docs/manual/5.1/admin-dateandtime.html

Title: Re: NTP Servers
Post by: Terry Brummell on April 01, 2002, 04:53:55 PM

Since you don't mention where you are from, I can only give you a place to start.  Take a look here and if you follow some of the links you will find public NTP servers to sync to.

http://www.eecis.udel.edu/~mills/ntp/servers.htm

Terry

Title: Re: NTP Servers
Post by: Michel-Andre on September 15, 2002, 01:10:57 AM

Easy way to get the NTP to work:

go to this web site, http://www.eecis.udel.edu/~mills/ntp/clock1.htm

copy any url as for the first one: ntp.ise.canberra.edu.au
and paste it in server-manager -> date and time -> NTP server then just click on Save NTP Settings. If after a few seconds, the answer from your server said the time is set to ... then it is ok. If not, try another location

Title: Re: NTP Servers
Post by: Charlie Brady on September 15, 2002, 03:10:14 AM

Michel-Andre wrote:

> Easy way to get the NTP to work:
>
> go to this web site,
> http://www.eecis.udel.edu/~mills/ntp/clock1.htm
>
> copy any url as for the first one

Stratum 1 servers should not be used by end point clients. Please see:

http://www.eecis.udel.edu/~mills/ntp/servers.htm

for the general policy, and please use stratum 2 or lower servers.

Regards

Charlie