Koozali.org: home of the SME Server

Legacy Forums => General Discussion (Legacy) => Topic started by: kristallix on April 04, 2002, 12:38:24 AM

Title: isdn error
Post by: kristallix on April 04, 2002, 12:38:24 AM

Hi,

I could use some advice concerning my ISDN (internal pci) modem. Just bought a Safeway winbond modem. The modem is recognized bij sme 5.1.2 but causes trouble when working. Internet/e-mail facilities dont work after a while. When i reboot te server the system goes down and i see this message:

ISDN Hisax ch0 cause E0010

The trouble is, i bought this modem because others are working with it and seem to be happy. I have not altered templates but i have added Stephen Noble's multipop noarch. (no error messages).

any tips/solutions are welcome!

gr,
Kris

Title: Re: isdn error
Post by: Kees Blokland on April 04, 2002, 01:29:59 AM

Hi kristallix,

>When i reboot te server the system goes down and i see this message:
>ISDN Hisax ch0 cause E0010

Not an error but correct, it means that when you reboot, the system hangs up!!
....

Please do post a bit of logfile, without it is is difficult to guess what is going on.

The system tells you it hung up, yes, great, nice to know....


kees

Title: Re: isdn error
Post by: guestHH on April 07, 2002, 10:01:15 PM

Hi,

This message: ISDN Hisax ch0 cause E0010

Means you don't have a (active) ISDN line

Regards,
guestHH