Koozali.org: home of the SME Server

Contribs.org Forums => General Discussion => Topic started by: ilko on January 11, 2008, 11:19:08 PM

Title: SME 7.3 in to HP Proliant DL360 G4p
Post by: ilko on January 11, 2008, 11:19:08 PM

I want to install SME 7.3 in to HP Proliant DL360 G4p
my problem: NO both from install CD

It is possibly?

tx!

Title: Re: SME 7.3 in to HP Proliant DL360 G4p
Post by: imcintyre on January 11, 2008, 11:32:23 PM

Stupid question time...
Did you go into the bios and change the boot order?

Title: Re: SME 7.3 in to HP Proliant DL360 G4p
Post by: byte on January 11, 2008, 11:41:45 PM

Also have you checked the md5sum of the downloaded iso to make sure the iso was downloaded correctly ?

And have you got another CDROM to try as it could be that.

Title: Re: SME 7.3 in to HP Proliant DL360 G4p
Post by: ilko on January 11, 2008, 11:43:58 PM

boot order is good - CD is the first place

system find CD in device but no read him

other system read the CD

Title: Re: SME 7.3 in to HP Proliant DL360 G4p
Post by: imcintyre on January 12, 2008, 12:31:39 AM

ok so the hardware works, that leaves the disc. Do you know how to check the MD5 sum? The MD5 value will be downloadable where you got the iso for sme. Let me know how that goes.

Title: Re: SME 7.3 in to HP Proliant DL360 G4p
Post by: ilko on January 12, 2008, 12:28:49 PM

I checked the md5sum - result is OK
I reburn ISO in to install CD and now it work OK

thank all