Koozali.org: home of the SME Server
Obsolete Releases => SME 7.x Contribs => Topic started by: mmellon on February 28, 2008, 04:40:33 AM
-
Hello all,
Great work on so many things, so first off, THANKS.
That said, I'm sure I'm doing something wrong or have missed a needs-to-be-updated-in-howtos step somewhere. I've got a new install of SME 7.3 and followed the php5-cgi howto, confirmed it works as instructed, and setup egroupware as per the howto, confirming php5 works at the rpc.php address.
So now I have installed the open source Funambol for Windows Mobile (a smartphone, WM6), and can connect, though not from the WAN yet (not sure why yet), and via the LAN can get as far as "the server has requested a full sync, yes/no". I select yes and always always get a sync error. There isn't much in the Funambol client's logs, even with debug logging turned on, and I haven't seen anything at all useful in the "view logs" server panel.
Does anyone have SME/egroupware/Funambol working? With Funambol clients (not just egwosync)? Is there a step missing form the howtos, or something I could look for that I might have messed up by misunderstanding a howto?
I have a custom certificate from cacert.org as per that helpful howto, so no longer get cert errors/warnings on machines where i have installed the 2 root certs from cacert.org. I have also installed the cert on Windows Mobile as per their instructions. Can get to /webmail fine w/out errors on Windows Mobile, just can't get past "Sync Error" in Funambol.
I tried v.6.5 current and even 6.0.19 (I think -- in the 6.0.x series anyway -- there is no 6.0.14 as mentioned in the howtos available online in "old versions").
Any ideas at all anyone? I'm stumped and really had planned on having mobile sync with SME... :(
Any advice/tips/experiences are very welcome.
Thanks!
--Matt
-
Hi mmellon,
Have you set up the paths in eGW like this (http://www.egroupware.org/index.php?page_name=wiki&wikipage=SyncMLFunambol) ?
I have it working with Funambol 6.5.14, can't really see that you left out any steps except for maybe the above.
-
Yes, I do have the sif format and ./siftasks ./sifcontacts and ./sifcalendar set.
I can get the phone to send events or contacts, maybe 20 or 40, then wait for server data, then returns error. Log says "server returned error code -1".
Hmm.
I'm going back to 6.5.14 (or current) to try that again.
Thank you,
--Matt
-
...By the way, Funambol client seems to want to sync email, but is by default pointing to a funambol.com account. Do you ignore/delete this account and just set up IMAPS, or do you reconfigure the Funambol-installed account to point to egroupware? (And if so, how?)
Thanks!
--Matt
-
I just re-checked my egw installation, and the only warnings I get are about ORACLE and ODBC support, which I don't need, and this:
Passed Checking PEAR::Net_Socket is installed: 999.egw-pear
Warning Checking PEAR::Auth_SASL is installed: False
PEAR::Auth_SASL is needed by: EMailAdmin, felamimail. You can install it by running: pear install Auth_SASL
Could I be missing something that causes Funambol sync to fail? I reinstalled Funambol 6.5.14 on the WM6 Smartphone and still get "server failure" errors after the phone sends some data to the server, then waits with "waiting for server data" then the error.
Thanks for any help,
--Matt
-
While neither work for me, I did notice that the how-to in the Contrib differs from the egroupware.org instructions on syncing for the calendar, specifically that one uses sif and ./sifcalendar and the other calendar and vCalendar format.
From the howto:
4. Funambol
Download Web site: Funambol Web Site Download Funambol 6.0.14 link Funambol 6.0.14
1) Install Funambol 6.0.14
2) Change "7" to "0" for mbstring.func_overload = 0 in php.ini
3) Open Outlook go to the Funambol Setup (Funambol --> Option)
4) Select all items
5) Setup options:
ACCOUNT
Location = http://Domain Name/egroupware/rpc.php or http://Server IP/egroupware/rpc.php
Username = Your user login name for eGroupWare
Password = Your user password for eGroupWare
SYNC
CONTACTS
Sync Direction = Two-Way
Remote name = ./sifcontacts
Data Format = SIF
CALENDAR
Sync Direction = Two-Way
Remote name = calendar
Data Format = vCalendar
TASKS
Sync Direction = Two-Way
Remote name = ./siftasks
Data Format = SIF
NOTES
Sync Direction = Two-Way
Remote name = ./sifnotes
Data Format = SIF
--Snoopyski 19:04, 20 September 2007 (MDT)
However, the how-to/Contrib does not specify instructions for Windows Mobile devices....
Still stumped. Maybe there is a php.ini setting that is limiting the ability to upload/sync enough data? That would not explain tasks, however, as I have no tasks on the phone and only 2 tasks in egroupware (trying to see if that helped). Therefore, I'm inclined to think perhaps it is an egroupware problem and not unique to SME. If it is a php.ini (or more accurately, php5-cgi.ini which is NOT templated, right? you edit that php5.ini file directly, yes?, because it is installed not as an SME contrib exactly, but sort of kludged in via the php5cgi howto?)
Many thanks,
--Matt
-
I think the problem comes from the memory limit on php5-cgi, I had the same error trying to use funambol (outlook plugin). You can verify this with the command tail -f /var/log/messages (or tail -f /var/log/httpd/error_log, I don't remember), while you try to sync. To correct this, edit the file /etc/php5/php.ini, find the line
memory_limit = 8M and increase it (16M, or 32M depending on the number of contacts)
-
Hello Everyone,
I have updated the synchronisation settings in the "eGroupWare HowTo on contribs" see the link:
http://wiki.contribs.org/index.php?title=Egroupware (http://wiki.contribs.org/index.php?title=Egroupware)
Have a good weekend of synchronisation everyone !
Stéphane
-
Success! Thanks! The 32M setting did the trick, thank you so much, and thanks for updating the howto.
--Matt
-
Hello again,
I'm afraid I've got one more question/problem. I've got rpc.php working beautifully thanks to the help given here, but tried to connect Kontact (current version on Ubuntu) via xmlrpc.php and I get the "element not found" error when checking from a browser. Kontact just gets no response, no calendar shows up.
My guess is that this could be a PHP4 vs. PHP5 conflict, or a conflict between settings specific to one or the other. For example, mbfunc_overload = 0 or = 7 depending on whether one is referring to rpc.php or not.
Could anyone comment relating the new .htaccess text in the howto to two things:
1. the php5-cgi howto, and,
2. the proper way to build an htaccess fragment as a custom template for httpd.conf?
I've already got a template fragment from the php5cgi howto, and want to create the proper htaccess fragments relevant to using xmlrpc.php, which I believe is still using php4 (as suggested by the Outlook sync via egwosync text).
Lastly, note that I think /etc/php.ini (or wherever it is exactly) is templated/generated, but it seems to me (and I could be wrong) that the php5cgi's php5.ini is NOT templated/generated, and thus would not honor template fragments, but has to be edited directly -- is this accurate?
Many thanks!
--Matt
-
mmellon
2. the proper way to build an htaccess fragment as a custom template for httpd.conf?
If you clicked on the Howto link at the top of these forums you would have found this:
http://wiki.contribs.org/Htaccess
-
Indeed, and I already had.
What I asked for was someone to comment on the egroupware howto that now suggests "creating an .htaccess file in the root of your egroupware" which directly contradicts the whole templating concept.
In addition, the instructions reference some lines that appear pertinent to php4 and those relating to rpc.php settings must reference php5, as that is required for syncml clients like Funambol to work.
I further noted that php.ini is templated, but the php5-cgi howto seems to not have a templated php5.ini -- rather, one must edit the php5.ini that is called for php5cgi apps by hand, again, directly in contradiction to the whole concept of templating these files.
So again, can anyone comment on the above apparent contradictions and fill in the gaps re:
php.ini
php5.ini (php5 as a cgi)
rpc.php (needs php5; does work for me following increase to 32mb setting)
xmlrpc.php (needs php4? 5? doesn't work for me right now...)
how to have /egroupware be php4 except for /rpc.php with php5 -- anything else need php5?
It could be that while all the pieces are there, I'm just hesitant to stick them together as I am new to it all, and trying to be conservative and stick to templating properly.
Many thanks again -- it's so encouraging to be so close to having this working right.
--Matt
-
mmellon
Whether you implement via a .htaccess file or via a appropriate custom template, the result is the same.
Doing it the .htaccess file way involves weaker security, so you are advised to use custom template fragments, and I provided a link which "generically" tells you how to do that.
-
Snoopyski -- have you by any chance used .htaccess template fragments, rather than using an actual .htaccess file? If so, might you be able to comment on fitting the .htaccess lines you kindly provided? I'm afraid I'm a bit concerned/confused about the current notes in the howto and worry that they are loosening security in egroupware.
Many thanks for all assistance!
--Matt
-
hmmm... by way of fyi, I did try adapting the how-to to the generic htaccess howto and broke my webserver. grrr... i think i managed to undo all of the damage, but the right way to do all of this is still well beyond me (and not documented).
I think that the real trick even if someone does know how to do this, will be getting custom template fragments for php.ini and httpd.conf for PHP4 apps and specifying PHP5-CGI as a handler for rpc.php, but then getting the PHP5-specific settings for rpc.php (mbstring_func.overload = 0 for example) into the php5.ini that is *not* (as far as I can tell) templated, and therefore will not use any custom template fragments.
Yeessh... what a complicated mess! (but such a powerful app if working right!).
Thanks for any help, of implied sympathy by reading this thread....
--Matt
-
Hi. I haven't look at the how-to on the wiki, but here are the steps to configure syncml with egroupware:
1. Install php5-cgi as explain in this how-to http://sme.firewall-services.com/spip.php?article46 (http://sme.firewall-services.com/spip.php?article46) (Stop after Step 3, Step 4 is just an example)
2 Create a custom-template so that rpc.php is handled by php5:
vim /etc/e-smith/templates-custom/etc/httpd/conf/httpd.conf/90egw-syncmland put this:
<Location /egroupware/rpc.php>
AddHandler php5-cgi .php
Action php5-cgi /php5-cgi/php
</Location>
3 Edit /etc/php5/php.ini (this file has no templates so you can edit it directly)
- Line 304 memory_limit = 8M, change it to a bigger value, for example memory_limit = 32M- Line 1191 uncomment the line mbstring.func_overload = 0 (I'm not sure this is usefull as php5-cgi has been compiled without mbstring support).
That's all, there's no need for htaccess file (htaccess could configure php4 because it's an apache module but not php5-cgi).
Now expand-template /etc/httpd/conf/httpd.conf and httpd -t to check if everything is ok, eventually sv t /service/httpd-e-smith to restart apache. Now the syncml should work. I've tested it with funambol plugin for outlook (several versions). I had some problem with duplication of contacts, but this is another thing, the syncml part just works.
Cheers.
-
VIP-ire
here are the steps to configure syncml with egroupware:
Good.
I added it to the wiki, see
http://wiki.contribs.org/Egroupware#syncml_configuration
Please check and see if OK
Thanks
-
it seems ok, thanks for adding it in the wiki (I'm not very familiar with wikis :S)
-
VIP-ire
It's really quite easy.
Have a look here
http://wiki.contribs.org/Help:Contents
You can also open a Contrib or Howto wiki article and then click on edit to see how it is formatted etc.
-
I have a strange phenomena - i've done all of the above and syncing between outlook and the server is reported by funambol to be completed successfully but i can't see the synced items on eGroupware web gui.
Egroupware is version 1.4.002 and SME is 7.3 with the latest updates, including smeserver-contribs updates and funambol is version 6.5.8 (latest for now).
Where to start finding whats wrong ?
Thanks,
Amir
-
I have seen this happen if you setup your client to sync via vcard and not sif.
There are more details about this on egroupware.org.
-
Did anyone manage to get PUSH EMAIL Working???
thanks to the fantastic guides that you guys have put together I have successfully installed egroupware, php5 and got funambol synchronizing my contacts, calendar, notes etc.... but I don't understand how to get push email working.
I have not been able to find any documentation which clearly outlines the procedure for enabling push email.
I have funambol installed on my PocketPC (Windows Mobile) PDA but when it sync's email it just seems to do nothing. NO errors, but no emails.
Anyone go this far? Can anyone point me to some good documentation?
Thanks!
Aaron
-
Anyone else getting failure after failure?
"Can't acces the server" from the Funambol client.
Checked and double-checked the entire howto, and the only thing I can't do is edit the .htaccess file (because I don't know how to, where it is etc)
What should I be checking?
-
Edit the .htaccess file using SSH and a text editor such as PICO.
I had numerous problems accessing the server but it was due to the SSL Certificate of my SME certificate not being installed as a trusted root certificate source. Install the certificate of your SME server on your workstations.
Turn the logs up on FUNAMBOL client and check it after an unsuccessful sync... it should give you enough information to move forward.
Regards
Aaron
PS: has anyone got PUSH email working?