Koozali.org: home of the SME Server

Obsolete Releases => SME VoIP (Asterisk, SAIL etc) => Topic started by: soprom on April 02, 2008, 09:24:36 PM

Title: How to setup Call back ?
Post by: soprom on April 02, 2008, 09:24:36 PM

hi,

i've created an entry for my cell phone as authorized in my cluster in Call Back.
When I call from this cell, the incoming route does not recognize the number and goes to the ring group.

With trunk defined on CALLBACK, I get these errors:

Code: [Select]

    -- Hungup 'IAX2/5149079086peer-1'
[Apr  2 15:36:09] NOTICE[6201]: pbx_spool.c:175 apply_outgoing: Channel should be in form Tech/Dest at line 1 of /var/spool/asterisk/outgoing/call200804021535.58
[Apr  2 15:36:09] WARNING[6201]: pbx_spool.c:245 apply_outgoing: At least one of app or extension must be specified, along with tech and dest in file /var/spool/asterisk/outgoing/call200804021535.58
[Apr  2 15:36:09] WARNING[6201]: pbx_spool.c:413 scan_service: Invalid file contents in /var/spool/asterisk/outgoing/call200804021535.58, deleting
[Apr  2 15:36:09] WARNING[6201]: pbx_spool.c:461 scan_thread: Failed to scan service '/var/spool/asterisk/outgoing/call200804021535.58'
[Apr  2 15:36:09] NOTICE[6201]: pbx_spool.c:175 apply_outgoing: Channel should be in form Tech/Dest at line 1 of /var/spool/asterisk/outgoing/call200804021531.25
[Apr  2 15:36:09] WARNING[6201]: pbx_spool.c:245 apply_outgoing: At least one of app or extension must be specified, along with tech and dest in file /var/spool/asterisk/outgoing/call200804021531.25
[Apr  2 15:36:09] WARNING[6201]: pbx_spool.c:413 scan_service: Invalid file contents in /var/spool/asterisk/outgoing/call200804021531.25, deleting
[Apr  2 15:36:09] WARNING[6201]: pbx_spool.c:461 scan_thread: Failed to scan service '/var/spool/asterisk/outgoing/call200804021531.25'


Title: Re: How to setup Call back ?
Post by: SARK devs on April 02, 2008, 09:49:28 PM

This is a known fault (limitation?)
Callback doesn't currently work properly over IAX


We're working on it.

Sorry Sophie

 :-(

Best

S

Title: Re: How to setup Call back ?
Post by: soprom on April 02, 2008, 09:52:47 PM

Ok, I'll try with Zap then...