Koozali.org: home of the SME Server
Obsolete Releases => SME 7.x Contribs => Topic started by: imcintyre on April 22, 2008, 03:56:20 AM
-
I have the same messed up Server-Manager page as others.
As per the wiki, http://wiki.contribs.org/Translations#Outdated_contribs I tried running the following:
[root@myserver ~]# find /etc/e-smith/locale/ -type f | xargs -n1 iconv -f UTF-8 -t UTF-8 > /dev/null
iconv: illegal input sequence at position 275
iconv: illegal input sequence at position 462
I searched and found this comment by Elmarconi http://forums.contribs.org/index.php?topic=40768.30 and just thought it belonged in its own post.
Any help with what this is and what to do about it would be appreciated
-
As stated, problem can be tackled by moving /etc/e-smith/locale/fr to another location, e.g. /root/etc/e-smith/locale/fr.
BTW: I do not have your first error: position 275. That might be another contrib.
Please list installed contribs by running:
/sbin/e-smith/audittools/newrpms | grep smeserver
-
Thanks, I'm at work right now but will try later at home.
-
I got rid of both errors by moving the fr directory as you suggested.
I ran the other command with the following results:
[root@myserver ~]# /sbin/e-smith/audittools/newrpms | grep smeserver
Loading "smeserver" plugin
smeserver-dar2.noarch 0.0.1-5.el4.sme installed
smeserver-egroupware.noarch 1.4.002-3.el4.sme installed
smeserver-gollem.noarch 1.0-13.el4.sme installed
smeserver-groupoffice.noarch 2.16.11-2 installed
smeserver-joomla.noarch 0.9-5 installed
smeserver-kronolith.noarch 1.1-11.el4.sme installed
smeserver-mimp.noarch 1.0-11.el4.sme installed
smeserver-mnemo.noarch 1.1-2.el4.sme installed
smeserver-nag.noarch 1.1-3.el4.sme installed
smeserver-openvpn-bridge-fws.noarch 1.0-3 installed
smeserver-phpmyadmin.noarch 2.10.0.2-0.dmay installed
smeserver-service_control.noarch 1.1-2 installed
smeserver-sme7admin.noarch 1.1.0-1 installed
smeserver-tf-b4rt.noarch 1.0-1.el4.sme installed
smeserver-torrentflux.noarch 0.9-7.el4.sme installed
smeserver-trean.noarch 0.1-3.2.el4.sme installed
smeserver-webshare.noarch 1.0.0-8dmay installed
-
Then I followed this:
http://forums.contribs.org/index.php?topic=40768.30
specifically;
yum update --enablerepo=smecontribs
signal-event post-upgrade
signal-event reboot
and then server mgr is back to normal.
Thx Elmarconi and Cactus
-
I have tried to fix this but I keep getting iconv: illegal input sequence at position 420
the new rpms I show are
smeserver-dar2.noarch 0.0.1-6.el4.sme installed
smeserver-eaccelerator.i386 0.9.5-1 installed
smeserver-fetchmail.noarch 1.3.6-3.el4.sme installed
smeserver-mailsorting.noarch 1.2-17.el4.sme installed
smeserver-mod_deflate.noarch 1.0-2.el4.sme installed
smeserver-openvpn-bridge-fws.noarch 1.1-1 installed
smeserver-password.noarch 1.0.0-8.el4.sme installed
smeserver-phpmyadmin.noarch 2.6.4-pl4.dmay installed
smeserver-proxypass.noarch 0.0.3-1 installed
smeserver-qpsmtpd-spamassassinlevelstars 0.0.2-0.el4.sme installed
smeserver-remoteuseraccess.noarch 1.2-19.el4.sme installed
smeserver-saco-qmHandle.noarch 1.3.1-1 installed
smeserver-sme7admin.noarch 1.1.0-1 installed
smeserver-spamassassin-features.noarch 0.0.2-0 installed
smeserver-wbl.noarch 0.0.1-a8.dmay installed
Not sure where to go from here
TIA
Bob
-
Did you happen to see this?
http://forums.contribs.org/index.php?topic=40789.msg189173#msg189173
-
I had looked at, but failed to read it :oops:. It looks like the fetchmail contrib was the problem.
Thanks
Bob
-
I have installed the April update and tried the following commands:
yum update --enablerepo=smecontribs
signal-event post-upgrade
signal-event reboot
But I still have unknown entries in srv mgr
Unknown
remoteaccess
uservacations
useraccounts
ibays
directory
datetime
sme7admin
groups
qmailanalog
localnetworks
viewlogfiles
workgroup
starterwebsite
yum
printers
hostentries
pseudonyms
emailsettings
remoteuseraccess
[root@server ~]# yum update --enablerepo=smecontribs
==============================================================
WARNING: Additional commands may be required after running yum
==============================================================
Loading "installonlyn" plugin
Loading "smeserver" plugin
Loading "fastestmirror" plugin
Setting up Update Process
Setting up repositories
Loading mirror speeds from cached hostfile
Reading repository metadata in from local files
Excluding Packages from CentOS - updates
Finished
Resolving Dependencies
--> Populating transaction set with selected packages. Please wait.
---> Package rrdtool.i386 0:1.2.27-3.el4 set to be updated
---> Package smeserver-vacation.noarch 0:1.0-22.el4.sme set to be updated
---> Package rrdtool-perl.i386 0:1.2.27-3.el4 set to be updated
---> Package sysstat.i386 0:5.0.5-16.rhel4 set to be updated
---> Package libmcrypt.i386 0:2.5.7-5.el4 set to be updated
---> Package smeserver-remoteuseraccess.noarch 0:1.2-21.el4.sme set to be updated
---> Package smeserver-userpanels.noarch 0:1.0-12.el4.sme set to be updated
---> Package awstats.noarch 0:6.7-1.el4.rf set to be updated
--> Running transaction check
--> Processing Dependency: libart_lgpl_2.so.2 for package: rrdtool
--> Finished Dependency Resolution
Error: Missing Dependency: libart_lgpl_2.so.2 is needed by package rrdtool
================================================================
No new rpms were installed. No additional commands are required.
================================================================
[root@server ~]# /sbin/e-smith/audittools/newrpms | grep smeserver
Loading "smeserver" plugin
smeserver-awstats.noarch 1.2-5.el4.sme installed
smeserver-remoteuseraccess.noarch 1.2-12.el4.sme installed
smeserver-sme7admin.noarch 1.1.0-1 installed
smeserver-userpanels.noarch 1.0-6.el4.sme installed
smeserver-vacation.noarch 1.0-13.el4.sme installed
Not sure what else to try but I had Cacti installed previously and had removed it thinking it may have been the problem but I'm not sure about the rrdtool error.
edb
-
Sorry ... it's fixed now.
I had to do a
yum remove rrdtool-1.0.50-3.el4.rffollowed by
signal-event post-upgrade; signal-event reboot
After the reboot, I could then do the
yum update --enablerepo=smecontribs
signal-event post-upgrade; signal-event reboot
It is all fixed now ...
edb